Tip & How-To about Chevrolet Silverado 1500

Automotive Vacumn Lines

Those vacumn lines that always have the boots and right angles that break; Okay try this;
From that old set of spark-plugs wires layin' in the corner, grab one and give it a firm pull on the boot; that boot will replace the right angle on the pcv valve: the one going in the the top the valve-cover and connected to the intake or trottle-body depending upon ,odel of car.
Remove the crumbled-up right-angle from the pcv valve and line and give the spark-plug boot a firm push and twist and it'll slide on, use a spot of oil and it'll even slide over the 3/8' lines, if you don't have oil, spit on the boot then push it on the valve and line .
This will work on many models and makes.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

2 Answers

Mitsubishi galant V6 replace spark plugs


Are you asking how to replace them?

Jul 04, 2014 | Cars & Trucks

1 Answer

what do I need to do to change spark plugs and wires on 1997 mountaineer


Spark plug wires just pull off and press back on. Make sure you grasp the wires by the rubber boot only. If you pull the wires by the wires, instead of using the boot, you can break the wires. Remove the plugs with a 3/8" ratchet, extension and a spark plug socket. I do not know if you have to remove anything to get access to the spark plugs and spark plug wires. You may need a universal joint to angle the ratchet.

May 15, 2014 | 1997 Mercury Mountaineer

1 Answer

steps to change a spark plug


easy job replace one spark plug at a time.you need buy new set of spark plug wires and spark plugs.reason need new wires possible old ones will break from inside plug boot when you remove plug wires.you need basic 3/8 ratchet wrench.you need long short extensions.need spark plug socket.need spark plug gap gauge.need a universal joint connect to the extensions to reach sharp angles.make sure engine cold when replacing spark plugs could damage heads.use a 12 inch piece vacuum hose to help aid in installing sparks in hard reach spaces with out damaging crosss threading plugs threads and cylinder head threads to plug.

Apr 25, 2013 | 1998 Pontiac Grand Prix

1 Answer

how to remove wires from sparkplugs of a guick lucerne


USE A SPARK PLUG WIRES BOOT PULLER.THE BOOT PULLER CAN GO TIGHT PLACES WHERE YOUR HANDS CANT REACH.ONCE YOU REMOVE SPARK PLUGS WIRES REPLACE THEM.SOME PLUG WIRES WILL BREAK AWAY FROM THE BOOT WHEN REMOVING SPARK PLUGS WIRES.DONT REMOVE OLD PLUG WIRES IF YOU DONT HAVE NEW SET PLUG WIRES ON HAND.BECAUSE YOU WILL DISABLE VECHICLE.IF COUPLE OLD PLUGS WIRES BREAK WHILE REMOVING THEM YOU WILL BE 2 PLUG WIRES SHORT AND YOU CANT DRIVE VECHICLE THAT WHY HAVE NEW SET OF PLUG WIRES ON HAND.

May 12, 2011 | Buick Lucerne Cars & Trucks

Not finding what you are looking for?

1,894 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...