Tip & How-To about Saab 900

SAAB service light 900

900

All Years

To clear "TIME FOR SERVICE" from the Saab Information Display, press and hold the "CLEAR" button for at least 8 seconds. A signal will be heard indicating reset. After the 21st restart of the vehicle, the "TIME FOR SERVICE" message will be cancelled.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

How do i reset the sid display in 2008saab93turbo after replacing battery


pressing the CLEAR button for 8 seconds. on older 9-5 and 9-3 SID's, that you must press CLEAR once & release, then press CLEAR a second time, and hold for 8 seconds. While holding down CLEAR for this second time period, at the 4 second mark "CLEARED" will be displayed, and you will hear 1 beep. If you release the CLEAR button at this point, the DTE and MPG will be cleared out. If you continue holding the CLEAR button past the 4 and 8 second marks, you will hear a 2nd beep, and "SERVICE" will be displayed. This now means that you have cleared and reset the Time For Service message.

Dec 01, 2014 | 2008 Saab 9-3

1 Answer

how to clear service engine soon light on dash after an oil change was done ?


Switch ignition on
Press and hold clr button for 8/10 seconds
Service will appear in display after 2 beeps
Switch ignition off

May 11, 2010 | 1999 Saab 9-5

1 Answer

I have 97K on my 2003 saab 93 and it is diplaying " time for service" message every time I start car. what need to be done


push and hold clear button, you will hear a chime and display will show clear,continue holding button and service will pop up and chime again. thats it

Jul 16, 2009 | 2003 Saab 9-3

1 Answer

Is there a reset button for a 2005 SAAB service engine light? I just had it serviced but it was before the light came on.


Pressing and holding the clear button for at least 8 seconds,you will lisen 2 signals on the 2º signal service it will flash.

Jul 08, 2009 | 2005 Saab 9-2X

1 Answer

How do I reset the oil life monitor?


To clear "TIME FOR SERVICE" from the Saab Information Display, press and hold the "CLEAR" button for at least 8 seconds. A signal will be heard indicating reset. After the 21st restart of the vehicle, the "TIME FOR SERVICE" message will be cancelled.

Jun 16, 2009 | 2007 Saab 9-3 Aero Convertible

Not finding what you are looking for?

1,645 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Saab Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

rgbypoet

Level 2 Expert

166 Answers

Are you a Saab Expert? Answer questions, earn points and help others

Answer questions

Loading...