Tip & How-To about Chrysler E-Class

CHRYSLER Eagle service how to reset maintenance light 1988-93

Chrysler,
All Models


1990-93

When "SERVICE REMINDER" appears on the Electronic Vehicle Information Center, press the "INFO" button and press the "SET" button within 5 seconds.


Eagle Premier,
Dodge Monac


1988-92

When "SERVICE" appears on the Vehicle Maintenance Monitor, press the "RESET" button located directly below the monitor. "MONITOR" should then appear on the display.



Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

how to reset oil change light after oil change


Turn ignition to on position. Push and release the menu button until "SERVICE INTV. =" appears. Press and release the STEP button to select the previous service interval or enter a new one with a YES or NO option choice. The Electronic Vehicle Information Center (EVIC) exits programming mode when the C/T button is pushed or when the end of the options menu is reached.

Oct 07, 2010 | 2006 Jeep Liberty

2 Answers

how do you reset the maintenance required light?


When "SERVICE REMINDER" appears on the Electronic Vehicle Information Center, press the "INFO" button and press the "SET" button within 5 seconds.

Hope this help (remember comment and rated this).

Apr 09, 2010 | 1991 Jeep Cherokee Limited

2 Answers

How do you reset Perfom Maintence Light?


there should be something in your owner manual if you have miss place your see if you can download one for your SUV its www.edmunds.com and for the most part the dealership will do it for you free of charge talk to the service manger wish you the best of luck Michigan Man

Oct 22, 2009 | 2004 Jeep Grand Cherokee

1 Answer

service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to accident repair. car runs great.


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

Not finding what you are looking for?

1,162 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Loading...