Tip & How-To about 2003 Ford Focus

Replace Front and Side Turn Signal Lights

I show how to replace the turn signal bulbs on the front and side of a 2003 Ford Focus Sedan.

Posted by on

2003 Ford Focus Logo

Related Topics:

Related Questions:

1 Answer

when I turn my turn signal on I can hear the turn signal but turn signal don't work


If on the dash the arrow just lights but no blink. You have a blown light bulb on that side could be front or rear. Turn on flashers it should ID which blub
mike

Feb 19, 2016 | 2003 Ford Focus

1 Answer

2007 Ford Focus front passenger side turn signal blinks fast. Works fine with head lamps off, doesn't work when headlamps are on.


faulty earth wire on the wiring cluster for the heat light check with a meter and fix the earthing point.

Mar 19, 2014 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Is there a trick to getting to the rear turn signal on a 2003 ford focus hatchback. I had removed the screw to the lens cover but I still cannot gain access to the turn signal bulb to replace it.


Replacing tail/brake/backup lights and turn signal bulbs (coupe)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. From inside the luggage

compartment remove the wing nut

of the rear light assembly cover.

3. Using a Phillips screw driver

remove the screw. The lamp is still

retained by a spring loaded clip.

Remove by gently pulling out the

light housing.

4. Turn the bulb socket counterclockwise as far as possible and pull it

out.

5. Pull the bulb straight out of the socket.

Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (sedan)

1. Make sure the headlamp control

is in the OFF position and then

open the trunk.

2. From inside the luggage

compartment remove the three wing

nuts of the light housing.

3. Gently pull the light housing to

the outside.

4. Turn the bulb socket

counterclockwise and pull it out.

5. Pull the bulb straight out of the socket.
Install in reverse order.

Replacing tail/brake/backup lights and turn signal bulbs (wagon)

1. Make sure the headlamp control

is in the OFF position and then

open the hatchback.

2. Using a screw driver remove the

fixings and trim from the body.

3. Remove the socket from the lamp

assembly

4. Pull the bulb straight out of the

socket.
Install in reverse order.


Hope this helps.

Zeppelinx12

Mar 03, 2011 | 2003 Ford Focus

3 Answers

2003 ford focus zx3 How to replace rt front marker bulb ???


the inner fender will provide a way. I would simply take it to a store and ask them nicely if they will do the install - -many times they will do it and at no charge. - if you must - -carefully pull away the inner fender from under the car - and look for the back of the marker -

DO NOT PRY on the plastic or you will break it and still not be able to change out the bulb.

Mar 11, 2010 | 2003 Ford Focus

2 Answers

how do you replace the tail light in a 2003 Ford Focus ZTS sedan? not a hatchback


Open up hatch , reach in and pull back liner, Remove nuts to release light lens. then push, turn and pull out bulb socket and same for bulb.

Sep 23, 2009 | 2003 Ford Focus

Not finding what you are looking for?

355 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Loading...