Tip & How-To about Ford Cars & Trucks

How to remove the inner wheel well liner on the Ford Edge

This video details how to remove the wheel well liner on your Ford Edge to access the power steering, alternator, AC compressor and power steering belt and the serpentine belt.
Removing the inner wheel well cover on 2011 Ford Edge

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

Need belt routing diagram for 2001 chrysler sebring lxi


Thanks for using FixYa.




jturcotte_2444.gif

Fig. Accessory drive belt routing-2.7L engine
Chrysler Cirrus & Sebring Convertible; Dodge Stratus; Plymouth Breeze



jturcotte_2445.gif

Fig. Accessory drive belt routing-Chrysler 2.7L engine





2.7L Engine
A/C & Alternator Belt

  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Loosen tensioner locking bolt and pivot bolt.
  4. Rotate tensioner clockwise to allow enough slack to remove belt

To install:
  1. Install the air conditioning compressor/alternator belt on pulleys, tensioner in slack position, slip belt over idler last.
  2. Adjust drive belt tension.
  3. Install the belt splash shield and right front wheel.
  4. Lower vehicle.
    jturcotte_2446.gif

    Fig. Installing A/C & alternator belt-2.7L engine


  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and safely support the vehicle.
  3. Remove the right front wheel and belt splash shield.
  4. Loosen the tensioner locking bolt and pivot bolt.
  5. Rotate tensioner clockwise to allow enough slack to remove the belt

To install:
  1. With the tensioner in a slack position, install the Air Conditioning (A/C) compressor/alternator belt on the pulleys. Slip the belt over the idler last.
  2. Adjust the drive belt tension.
  3. Install the belt splash shield and right front wheel. Tighten the wheel lug nuts to 100 ft. lbs. (136 Nm).
  4. Lower the vehicle.

Power Steering Belt
  1. Raise and safely support the vehicle.
  2. Remove the right front wheel and belt splash shield.
  3. Remove the air conditioning compressor/alternator belt.
  4. Loosen belt adjusting bolt. It is not necessary to loosen the pivot bolt on the power steering pump. There is a bushing incorporated into the power steering pump/bracket that allows it to pivot.
  5. Remove the power steering belt.

To install:
  1. Install the power steering belt on pulleys.
  2. Adjust drive belt tension.
  3. Install the air conditioning compressor/alternator belt.
  4. Install the belt splash shield and right front wheel.
  5. Lower vehicle.


Oct 27, 2011 | Cars & Trucks

1 Answer

i need to know how to change the water pump on a 1993 ford ranger i have all the bolts out but one because the pully brakit is in front of it and i can not figure out how to get it off.


YOU HAVE TO REMOVE THE ALTERNATOR AND BRACKET AND REMOVE AC COMPRESSOR AND BRACKET AND REMOVE POWER STEERING PUMP AND BRACKET.THEN YOU SHOULD BE ABLE TO REMOVE WATER PUMP BOLTS.

May 08, 2011 | Ford Ranger Cars & Trucks

1 Answer

what do i do to get new belt on


FOR THE 3.0L ENGINE IF YOU REPLACE AC BELT LOOSEN TOP IDLER PULLEY CENTER BOLT. IF YOU REPLACING ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTMENT BOLT AND PIVOT BOLT.IF REPLACING POWER STEERING PUMP BELT LOOSEN POWER STEERING PUMP ADJUSTMENT BOLT AND MOUNTING BOLTS.****** FOR THE 2.4L ENGINE TO REMOVE POWER STEERING BELT LOOSEN TOP IDLER PULLEY.FOR ALTERNATOR AND WATER PUMP BELT LOOSEN ALTERNATOR ADJUSTER BOLT, PIVOT AND MOUNTING BOLTS.FOR AC COMPRESSOR LOOSEN LOWER IDLER PULLEY.

Oct 07, 2010 | 1996 Nissan Pickup

1 Answer

how do i replace an idler pulley on a 02 xg350l


the 02 and the 05 are identical. There are TWO idler pullys ... one for the power steering, and the other for the AC compressor & alternator -- WHICH ONE? In any event, you'lll need to remove the right front wheel and the splash guard (10mm bolts) to access either of the pullys. Use 14mm wrench (or ratchet & socket) to loosen the appropriate pully (Pwr Steering has 14mm nut & two 14mm bolts), The other pully has one 14mm nut & one 14mm bolt.
Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Oct 14, 2009 | Hyundai Motor 2005 XG350

2 Answers

how to remove alternator



Park vehicle on level ground.
2. Remove battery from vehicle.
3. Remove air cleaner outlet hose, engine under cover ( right side ) and exhaust pipe # 2 .
4. Disconnect " B " terminal wire and coupler from the Alternator ( Generator ) .
5. Remove Alternator ( Generator ) belt.

6. Remove power steering pump. Do not disconnect hoses.
6. Remove Alternator ( Generator ) cover.
7. Remove Alternator ( Generator ) bracket mounting bolts.
8. Remove Alternator ( Generator ).

Power Steering pump has three bolts- 2 behind the pulley at 12 and 6 o'clock and one bolt on the back.

Once you get the power steering pump out of the way you can remove the last bolt on the alternator


Ok...I did not remove axle or disconnect hoses on power steering...I did unbolt power steering pump and moved off to side.

after that I disconnected sensor on throttle body and very carefully lifted alternator through the top where your air intake assembly would have been at, right next to A.C. refrigerant lines.It takes a minute , you HAVE TO BE CAREFUL NOT TO DAMAGE SENSOR!!

However it is a lot faster that taking off drive shaft and exhaust pipe!

If you go to AutoZone .com they have exploded diagrams of the parts you have to take off and they will show you bolt locations, the power steering pump bolt at 6 o'clock drove me crazy.

P.S. Get a ratcheting 12 mil wrench, it's a life and knuckle saver!!

Oct 16, 2008 | 2004 Suzuki Aerio

Not finding what you are looking for?

762 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Loading...