Tip & How-To about Peugeot 307

Peugeot 307 service reset procedure

  1. Press and hold trip reset button.
  2. Turn the ignition on.
  3. Continue pressing the button while countdown is displayed on the odometer.
  4. When countdown reaches 0 release the button.
  5. Turn the ignition off.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

Can't reset oil gauge on 2006 Lexus 430


Instructions
    • 1 Turn the ignition switch to "ON" without starting the engine.
    • 2 Press the trip odometer button to change the display to the total mileage.
    • 3 Turn the ignition switch to "OFF."
    • 4 Press and hold the trip odometer button. Turn the ignition switch to "ON."
    • 5 Release the trip odometer button when the oil change maintenance light resets.

Oct 17, 2012 | Lexus GS 430 Cars & Trucks

3 Answers

how to reset timing belt warning light after 150,000 km on toyota hiace 2kd-ftv engine


if it has a digital odo/ press trip knob until odo is displayed/ press and hold , turn ignition , hold for 4 secounds , release and press again, number 10 will be displayed, keep pressing until 20 comes up, press until odo reading is displayed again, turn ignition off , turn on again , notice the t belt lamp turn off in appros 5 secounds / if not able to reset try this again

Apr 02, 2011 | 2007 Toyota 4Runner

2 Answers

How do you turn off the "Car needs Oil Change"



1. Make sure the trip odometer is NOT on 'Trip A' or 'Trip B' (ie: just the normal ODO). With the ignition off, press and hold the reset button. Press the 'Start' button twice without pressing the brake, but while holding the reset button. The dash will let you know its resetting, just keep holding the button until it is done.


2. Make sure the Trip/Odometer is set to "trip A". With ignition off press and hold the reset button. While pressing the reset button, press the start/ignition button twice to turn ignition on. Keep watching the trip/odometer display to flash the lines (-----) until you see it flash the zeros (00000) then it

Feb 22, 2011 | 2009 Lexus LS 460

1 Answer

tire reset on in ford freestar


Reset without message center:
To reset turn the ignition to the ON position, depress and Trip/odometer
button (located in the instrument cluster) until “TIRE RESET” or
“CHECK TIRE AND RESET” is displayed in the odometer display window.
Once “TIRE RESET” or “CHECK TIRE AND RESET” is displayed,
press and hold the button for three seconds. The low tire warning indicator light will flash three times
as the low tire warning system begins to initialize.

------------------------------------------------------------------------
Reset with message center:
To reset turn the ignition to the ON position, press the set up button on
the message center until “SYSTEM CHECK” is displayed. Press the
RESET button until “HOLD RESET TO RELEARN” is displayed, continue to hold the button for three
seconds. The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

Oct 13, 2008 | 2005 Ford Freestar

Not finding what you are looking for?

742 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

mike hayward

Level 2 Expert

279 Answers

lloyd cole

Level 2 Expert

250 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Loading...