Tip & How-To about Dodge Caravan

Dodge caravan specs

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

does my 2003 dodge caravan have an interference engine


Not sure but if doing belt yourself I will give you important tips. 1) before removeing T/Belt set engine to TDC nr 1 there should be marks on the crank and cam (s) gears that line up with a mark on the block / head. 2) prior to removeing tension to belt get liquid paper & mark cam gear(s) & crank gear to point on block / head. 3) mark T/Belt to cam(s), crank, balance shaft if fitted. 4) release tension & remove belt. 5) transcribe marks from old belt to new belt & make sure correct amount of teeth. 6) fit new belt so YOUR marks line up. 7) have tensioner suply presure to belt. 8) turn motor twice by hand to make sure pistons no hit valves 9) Make sure YOUR marks line up if YOUR marks line up it has to be right. 10) Very IMPORTANT if spring tensioner lossen locking bolt again to take up extra slack in belt. 11) tighten locking bolt. 12) put back together.

Jul 11, 2012 | 2000 Dodge Caravan

1 Answer

wiring diagram for dodge caravan


I thinking that you are talking about "firing order"...

1997 Dodge Caravan FWD 2.4 liter DOHC L4 VIN "B"
and
1997 Dodge Caravan FWD 2.4 liter DOHC L4 VIN "X"

ed16d41.gif



1997 Dodge Caravan FWD 3.0 liter V-6 VIN "3"

a7df24a.gif



1997 Dodge Caravan FWD 3.3 liter V-6 VIN "R"
and
1997 Dodge Caravan FWD 3.3 liter Flex Fuel V-6 VIN "G"

678cb29.gif


1997 Dodge Caravan FWD 3.8 liter V-6 VIN "L"

6a92d51.gif

Hope this help (remember comment and rated this post).

Apr 22, 2010 | 1997 Dodge Caravan

1 Answer

Which spark plug is for the #2 cylinder on a 2001Dodge Caravan


2001 Dodge Caravan FWD
3.3 liter V-6 VIN "R"Cylinder # firewall, Passenger to drivers side, 1-3-5
Cylinder # radiator, Passenger to drivers side 2-4-6

Coil Block post # firewall, Passenger to drivers side 5-1-3
Coil Block post # radiator, Passenger to drivers side 2-4-6

Good luck

Nov 28, 2009 | 2001 Dodge Caravan

1 Answer

new half shaft shutters upon accelerating


Pretty cut and dry, replace the poorly remanufactured shaft. The symptom is classic bad inboard joint.

Mar 30, 2009 | 1993 Dodge Grand Caravan

Not finding what you are looking for?

1,904 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Loading...