Tip & How-To about Cars & Trucks

How to clean car body cheap

First soak the car in water for 30 minutes by random spraying.
use water soaked ditergent powder ex.tide to apply with mild pressure on surface.
then wash the car completely to get ride of foam.
the above process will equal to teflon coating

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

my polycarbonate plexiglass got left in the sun and now i cant seem to get the protective covering off one of the sides. is there anything that will help without marrimg the window?

First try soaking it with washing up liquid and hot water. Leave to soak an hour and then try.

Failing that, spray with WD40 and leave for 15 minutes.

Lexan Polycarbonate is tough stuff.

Nov 08, 2016 | Cars & Trucks

1 Answer

How to clean miata evaporator?

Use a hose and set the water spray for a high pressure. You can spray it with fantastic cleaner first, if there is any oily residue on the evaporator. Let it soak in for several minutes.

May 14, 2014 | Mazda MX-5 Miata Cars & Trucks

1 Answer

changed battery in 1998 z28 camaro and cleaned K&N air filter service engine light came on a couple of days later. tried disconnecting battery for 20 minutes did not work.

I've heard that if you have a K&N filter, the oil applied to the filter can vaporize and get sucked thought the intake. The problem could be that this oil gets baked onto the MAF sensor. You may want to try and clean the MAF sensor with MAF cleaner available at a parts store. Do not use a brush on your sensor. Just spray, soak, spray, soak... until clean and shiny.

Nov 19, 2010 | 1998 Chevrolet Camaro

1 Answer

i cant get the rear tire off my 1999 jeep grand cherokee i took off the lug nuts and the tire will not budge

You have Aluminum/mag wheels? If so, you have corrosion that has fused the wheel to the hub. Go get som PB Blaster at the auto parts store. Spray where the lugs are and if possible. at the 12 o'clock position of the hub to let it soak. You may need to get a heavy mallet to hit this from behind later afte soaking for 30 minutes.

Feb 06, 2010 | 1999 Jeep Grand Cherokee

2 Answers

Engine has old oil in many places--cannot see where leak is--how do you properly wash off an engine?

u either rent a pressure washer or buy engine degreaser from the local parts store and use a pressure nozzle on a garden hose, let the degreaser sit for 20 minutes to do its job before washing it off, aviod ignition system components with direct spray.

Nov 19, 2009 | 2000 Ford Taurus

Not finding what you are looking for?

115 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions