Tip & How-To about Cars & Trucks

Pick a parts

If Auto zone does not have your part please go to ( pick a parts ) 90 percent of the time they have what you need just get there early. Plenty of cars and atleast one of the same car on each row. Dont go to the dealership. If you have to order it...Order from wholesales online the warehouse. Also to save you money do it your self!!!! Go to ask.com or youtube this is where I learn how to do all of what I need done. And if you dont have time to hopefully you will find a machanic where you buy the parts and he will do it cheap! :)

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

Why would a car start right up one time, then not start a little later?

Because Auto Zone failed to do the required testing

Fuel Pump --failed
Old car & fusible links in wiring harness corroded
5 other possible reasons

Jul 27, 2014 | 1989 Cadillac Eldorado

1 Answer

I have to replace my driveshaft on 1997 honda crv. The joint is little bit rusted now eventually it will break down on me while driving. Where can I get the parts to fix this problem.

You can pick up these parts at any local auto parts store. Napa, Auto Zone, Knects, or whatever auto parts store that is located nearest you.

It is best to price at least three as each will (may) have different prices.

Please let me know if you need any further assistance.


Guru, Premium Expert @ Fixya.com

May 08, 2010 | 1997 Honda CR-V

1 Answer

the engine light on my 2006 suburban came on the oil is at 49 percent.can that be the reason for the engine light going on?

Yes, But to be sure bring it to an auto parts chain like Auto-zone, they will pull the codes from your computer and give you a list of what might be wrong. and they include a parts list!!

Apr 02, 2010 | 2006 Chevrolet Suburban

1 Answer

4x4 vacuum for jeep 90 cherokee need schematic

pick up a hains manual or go to an autoparts store like auto zone they can pull up and print you 1

Feb 06, 2010 | 1990 Jeep Cherokee Limited

1 Answer

My 1993 Chevy pickup truck wiper motor will not come on in the morning. After I drive around for about an hour they pop on.

It sounds like the circuit board in your wiper motor module has gone bad. 90 percent of the time it's just a bad solder and it's an easy fix if you have a solder gun and some solder. The clip on the circuit board where the wire harness clips on to break's causing lost of current flow. You can try tapping the wiper motor where the wire harness clips on to and see if the wipers work. You can go to Auto Zone and by a new circuit board or the whole wiper motor assembly. The other thing to is going to a Salvage Yard and picking one up for $15.00 if you pull from a truck out side and there have a 90 day warranty, just keep in mind that your truck is 16 years old and a $15.00 investment for a wiper motor from the salvage yard is towards your advantage. Good luck and hope this helps. Keep me posted, be glad to help.

Jun 12, 2009 | 1993 Chevrolet K1500

Not finding what you are looking for?

1,129 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15387 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions