Tip & How-To about 2003 Chevrolet Monte Carlo

Resetting Low Tire Light (2003 Monte Carlo)

1. Turn the ignition to ACC or Run and turn off the radio.
2. Press an hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.
3. Press the SEEK PSCAN up or down arrow to scroll through the main menu.
4. Scroll until TIRE MON appears in the display.
5. Press the 1PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
7. Once the monitor has been reset, scroll until EXIT appears on the display.
8. Press the TUNE DISP button to exit programming. A chime will be heard to verify exit.

Posted by on

2003 Chevrolet Monte Carlo Logo

Related Topics:

Related Questions:

2 Answers

how to turnn off the change oil light


For this year and model what you want to do is the following

1. Turn your key to the On or ACC position and turn off the radio.

2. Press TUNE DISP button on the radio and hold it in for about five seconds. The word "Settings" should display. Then press the "Seek Ptype or "Seek Pscan" up or down arrow to scroll through the menu.

3. Keep scrolling until the menu reads "Oil Life" on the display. Push the "Prev" or "Next" button to go to sub-menu. You then want to press "Seek Ptype" or "Seek Pscan" up or down arrow until you find "Reset" displayed.

4. Now, press the "Tune Disp" button to reset the oil light. A chime will sound letting you know the light is reset, and "Done" should show on the display.

5. Scroll with buttons until "Exit" appears on display. Press "Tune Disp" to end program. Another chime will sound.

DONE

You can find more oil reset procedures at Oil Light Reset

Mar 04, 2011 | 2002 Chevrolet Impala

1 Answer

how to reset low tire pressure light


How to reset low tire pressure monitor, the reset is in radio controls. 1. Turn the ignition to ACC or ON and turn the radio off.
2. Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.
3. Press SEE PSCAN up or down arrow to scroll through the main menue.
4. Scroll until the TIRE MON appears on the display.
5. Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
7. Once the monitor has been reset, scroll until the EXIT appears on the display.
8. Press the TUNE DISP button to exit programming. A chime will be heard to verify exit.

Hope helps (remember to rate this).

Nov 05, 2010 | 2001 Chevrolet Monte Carlo

1 Answer

Resetting oil life sensor


USING THE RADIO:

Follow this procedure to reset the GM Oil Life System.

Turn the ignition to ACC OR ON, with the radio off.
Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.
Press the SEEK PTYPE or the SEEK PSCAN up or down arrow to scroll through the main menu.
Scroll until OIL LIFE appears on the display.
Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
Once the message has been reset, scroll until EXIT appears on the display.
Press the TUNE DISP button to exit programming. A chime will be heard to verify the exit.

USING THE ACCELERATOR PEDAL:

Follow this procedure to reset the GM Oil Life System.

Turn the ignition to ON, with the engine off.
Fully press and release the accelerator pedal three times within five seconds.
If the CHANGE ENGINE OIL message flashes, the system is reset. However, if it stays on , it did not reset. Repeat the procedure.
Source(s):GM Service Manual

Jul 03, 2010 | 2006 Chevrolet Impala

2 Answers

how to turn off the change oil light


1. Turn the ignition to ACC or ON and turn the radio off.

2. Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.

3. Press SEE PSCAN up or down arrow to scroll through the main menue.

4. Scroll until the OIL MON appears on the display.

5. Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.

6. Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.

7. Once the monitor has been reset, scroll until the EXIT appears on the display.

8. Press the TUNE DISP button to exit programming. A chime will be heard to verify exit.

Enjoy!!!

Jun 17, 2009 | 2005 Chevrolet Monte Carlo

2 Answers

Low Tire Pressure Alert won't Clear


2 ways disconnect the battery for about 5 minutes or hook up an obd II and erase the codes

Mar 22, 2009 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?

3,165 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...