20 Most Recent 2000 Toyota Camry Questions & Answers

More than likely its a fuse but I am not looking at your service manual, it would be rather simple to locate if the original markings are still in the car. Wherever the fuse box is locate it, whatever housing it is inside should have a diagram with description of the orientation and values of the fuses. Look for 1 that says Headlights/ lights/or high beams, locate and remove the fuse, check if it needs replacing and replace it. Honestly it sounds like you need a new left high beam but I answered your question. There is a method of deduction that can help you figure out whats wrong before acting on any resolution, you should consult an expert that you can speak directly to and even share video. https://www.6ya.com/mr.mike thats only if you need the extra help. Thank for your visit and have a great night

2000 Toyota... | Answered on Mar 14, 2019

It 's the unit. bring it to a repair facility( fairly easy to remove) and have them do the repair . Its a lot cheaper than buying a new unit. If you decide to do this let me know and I'll tell you how to remove and install the unit.

2000 Toyota... | Answered on Mar 11, 2019

calipers are a toyota only dealer part unlike a ford with bendix or bosch brakes so as its a dealer then the sky is the limit ,strip and clean the fit new seals and make sure the seal path in the caliper body it well clean and they will work just like new.

2000 Toyota... | Answered on Feb 17, 2019


2000 Toyota... | Answered on Dec 25, 2018

The click you here is the horn relay, You need to find the horns and check for power at the wire connectors. But you probably have a bad low and now a bad high not horn. since the relay clicks your fuse is good so that eliminates the fuse.

2000 Toyota... | Answered on Dec 21, 2018

This system includes air cleaner, intake manifold, exhaust manifold, exhaust muffler, exhaust turbocharger ( for turbocharged diesel engine) , intercooler ( for turbocharged and inter-cooled diesel engine) and connecting pipes.

valve or exhaust arresting device installed after the primary filter to take off the dust from filtering. The resistance of the air cleaner should not be too big, the allowable max. resistance under its stained condition is 3kPa, and that under its stained condition is 5kPa. There is maintenance indicator mounted at the vent port of air cleaner, when red signal is given that means maintenance or replacement should be taken place in time, otherwise the performance and service life will be influenced.

2000 Toyota... | Answered on Nov 05, 2018

It locates behind the coin box ( left , below steering whell ). You have to replace the coin box, just pull it out sofly. =)

2000 Toyota... | Answered on Jul 13, 2018

No such DTC listed

2000 Toyota... | Answered on Apr 05, 2018

I have the same problem ? couldnt get your solutions, is there anyone who has a simple solution to do

2000 Toyota... | Answered on Mar 20, 2018

There are three fuses involved that supply the ignition switch voltage, the 120A alternator fuse, this fuse powers the smaller AM1 and AM2 fuses, then the voltage goes from there to the ignition switch

2000 Toyota... | Answered on Mar 07, 2018

Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia
What warning light ? It's not too much current flow , too much current flow would cause fuse to blow . Resistance causes heat !
Electric Testing Techniques You Need to Know

2000 Toyota... | Answered on Feb 17, 2018

The socket is cheap, replace it.

2000 Toyota... | Answered on Feb 08, 2018

Petrol pump or filter, Say Please ......

2000 Toyota... | Answered on Jan 29, 2018

buy a short subscription to alldatadiy.com and print out the step by step with diagrams of where the fastener clips are.

2000 Toyota... | Answered on Jan 27, 2018

  1. check your steering koppeling

2000 Toyota... | Answered on Jan 19, 2018

hello, the back up lights are usually on the same fuse as the tail lights so if they are working it's not a fuse, if the tail lights are not working replace the tail fuse. Otherwise the problem is most the backup light switch, on the manual transmission it's a separate switch located on the transmission on an automatic it is incorporated into the neutral start switch also located on the transmission but on the shaft where the shift selector attaches.

2000 Toyota... | Answered on Dec 24, 2017

Not finding what you are looking for?

1,661 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,794 Questions

1994 Toyota Camry
1994 Toyota Camry

1,723 Questions

1998 Toyota Camry
1998 Toyota Camry

1,525 Questions

2002 Toyota Camry
2002 Toyota Camry

1,266 Questions

1996 Toyota Camry
1996 Toyota Camry

1,111 Questions

Top Toyota Experts


Level 3 Expert

84619 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Camry Toyota

  • Camry Toyota

Most Popular Question

2000 camry highbeam shorted while

  • Cars & Trucks