how to repair the rpm of daihatsu charade 1988.i change the rpm coil ,circiut board but just move...
(More)
how to repair the rpm of daihatsu charade 1988.i change the rpm coil ,circiut board but just move when i on the car but if i accelerate no deflection.thank you
I have a Daihatsu Mira 1988 800cc and the light indicator on the battery is fine, but the dashboard...
(More)
I have a Daihatsu Mira 1988 800cc and the light indicator on the battery is fine, but the dashboard lights don't work. There is no power in the car at all. the key turns nothing happens everything electrical does not work. I have check all the fuses under the steering wheel and it seems they are all fine. I have tried to jump start nothing works is there a simple fix for this problem? Are there other fuses in the car that I can check?
I have ND Compressor Install in My Charade 86 and from that time it was working fine. but now when...
(More)
I have ND Compressor Install in My Charade 86 and from that time it was working fine. but now when the out temp is normal it works but when the out tem rise to 40C the comprason got struck and comprasor start giving sound very loudly...... now i was change my comprasor...... recomand me that which comprason will be a good option for mt G11 Charade Standard Running on CNG (Gas) SANDAN or ND ? which comprason put less load on engine with good cooling? which on is batter and do tell me are they available in New for my car?
I Have Charade 86. Months Ago Its Fan Get Starts When Its Temperature Attant 30% On Gage And Turns...
(More)
I Have Charade 86. Months Ago Its Fan Get Starts When Its Temperature Attant 30% On Gage And Turns Off As It Comes To 25-20% On Gage....... Now It Starts On 50% Temperature On Gage And Turns Of At Same Level 20-25% On Gage........ I Didn't Bring The Sensor out From The Engine I Just Clean Its Two Terminals.... (One Earth and Second Fan) But Still Acting The Same............ Should I Clean That Sensor by Bringing It Out From Engine? Should I Replace It? NOTE: As I Am From Subcontinent..... JUNE AND JULY are Too Hot Here...... Is It Possible That External Temp Effecting The Sensor.... Kindly Tell In Breif
When I switch On AC of my car... radiator fan doesnot get direct.... still with ac it works...
(More)
When I switch On AC of my car... radiator fan doesnot get direct.... still with ac it works automatically..... some one say me that it should get direct while you swich on AC.... i have CHARADE 86 Model
1993 fuel injected charade, my car keeps on dying when it has low revs to then engine like its...
(More)
1993 fuel injected charade, my car keeps on dying when it has low revs to then engine like its flodding it self and sometimes when i drive it feels like it is kicking back against me,
Diahastsu charade 1988 G102 4 cyl and the TPS is a switch only not a pot. I've had the problem 4...
(More)
Diahastsu charade 1988 G102 4 cyl and the TPS is a switch only not a pot. I've had the problem 4 years since I bought the car. It starts OK but when it's warmed up and you accelerate a little so the TPS just comes off or the switch opens, the engine hunts. When you actually drive off slowly it kangaroo hops. No fault code come up according to an Auto electrician. I'm not sure if he warmed it up properly. Can you help me ? thanks
Car accident - left hand head lights smashed and I need the small narrow indicator light as well....
(More)
Car accident - left hand head lights smashed and I need the small narrow indicator light as well. Found some 1985 Daihatsu Charade lights online but not sure whether its the same as the 1988. Can you help pls?
Battery is good. Usually carburator get wrog. When it repair(cleaned), car workes well for some...
(More)
Battery is good. Usually carburator get wrog. When it repair(cleaned), car workes well for some days. If the car does not sart for one or two days same broblem will apear. Thank you
I am changing the head gasket and need to set the valve timing marks before I remove timing belt but...
(More)
I am changing the head gasket and need to set the valve timing marks before I remove timing belt but i cannot find any timing marks on the crankshaft pully