20 Most Recent
1984 AMC American Motors Eagle - Page 7 Questions & Answers
How hard is it to change the serpentine belt in 2006 rendezvous
If the belt has fallen off there must be a problem. The don't just fall off of the car without assistance. With the belt off, check all of your pulleys to make sure they are turning properly. Then, get the manual for your vehicle and it will show you how to do this job :() Every car is different but all cars are the same generally and this is usually just a matter of putting the correct wrench into the tensioner to remove/apply tension and route the belt around everything in the proper direction.
There is usually a sticker in the engine compartment/hood area that shows the diagram of how the belt is routed.
My 2011 ram 3.6 liter v6 engine has 3 ignition coils w/spark pugs on driver side and just 3 spark plugs on passenger side. What is the cylinder order?
Dodge use a system called a "Lost Spark Ignition". Basically each coil fires two spark plugs on two different cylinders at the same time every time. One firing for the ignition stroke and the during the exhaust stroke on the other cylinder. Simply, a spark fired every other stroke on every cylinder. That means it only needs 3 coil packs on a V6 engine.
Your firing Order is 1, 2, 3, 4, 5, 6. Cylinder numbers are set as Odds and Evens. Stand with the belts and pulleys nearest to you. The cylinders on the Left side are the Odd numbers and the cylinders on the Right side are the Even Numbers. The cylinder on the LEFT side nearest to you is number 1. The middle one is number 3 and the one furthest away is number 5. The cylinder on the RIGHT side nearest to you is number 2. The middle one is number 4 and the one furthest away is number 6.
How do you change the light bulb in a Mettler P1210
If you find screws or a latching mechanism, use the appropriate tool to open the compartment. It might be a good idea to wear gloves during this process to avoid any injury from broken glass and make sure the replacement bulb is the correct type for your scale.
Exhaust rockers breaking on h100 2.6
More information please. What do you mean by "Breaking"? Has the engine been modified, things like different Cam, different valve springs? Is it just one or two rockers breaking or are they all being damaged? These will all give clues as to what might be the problem.
How to stop traction control from turning itself on?
The traction control uses the braking system to work. If you have repaired the tyre the issue could be with a sensor for the traction control system itself. Do you have any warning lights on the dashboard? Have you had the vehicle plugged into an OBD2 Diagnostic Scanner? This could give Trouble Codes as clues to any possibly faulty sensors causing the issue.
If you have to pay for this service ask at 4 or 5 different places as prices can be VERY different!
Not finding what you are looking for?