20 Most Recent 1999 Chrysler Town & Country Questions & Answers


Get a wiring diagram. Unplug connector from BCM and do a continuity check on each door at the BCM. That'll tell you whether it's a door switch, wiring or BCM problem

1999 Chrysler... | Answered on Oct 14, 2017


Hi,
Sounds like a worn/bad/damage transmisison or engine mount. These hold the engine and trans in place and usually have a rubber part that can wear out.

Either a trans shop or regular mechanic will need to diagnose.

I don't know the cost.

GL,
TD

1999 Chrysler... | Answered on Jun 07, 2017


Ok start by looseing your belt and removing it. Next remove the hoses from the pump and elevate to keep from dripping an excess of fluid. Next, unbolt the existing pump and remove. Then position the new unit and bolt back up. Re-attach the hoses. Put the belt back on and tighten until you have approx 1/4" of play. Fill the resevoir on the new pump. Start the vehicle and turn the wheels, drive a couple of miles, recheck the fluid and fill as needed. You are now in business! Good Luck! I hope you find this very helpful!

1999 Chrysler... | Answered on Feb 12, 2017


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

1999 Chrysler... | Answered on Dec 30, 2016


I would suggest you have the oil pressure checked with a manual gauge. It sounds to me like you might have a restriction at the sump tube and your engine has low oil pressure.

1999 Chrysler... | Answered on Jan 22, 2016


You might be able to disconnect the negative battery cable for a period of time?
Otherwise, the use of an OBD II, Scanner/Reader should be able to clear codes. Most Auto Parts stores will provide scan-read-clear services for free.

1999 Chrysler... | Answered on Jun 17, 2015


inside the radio not repairable by consumers

1999 Chrysler... | Answered on Jun 07, 2015


It happened to our 99 too, turned out to be inside the steering wheel. a coil that Chrysler recalled. It was a free repair at a dealership

1999 Chrysler... | Answered on May 26, 2015


the mode motor that operates this vent has likely failed this cars are prone to this problem

1999 Chrysler... | Answered on May 26, 2015


This can be a safety feature the manufacturer has implemented in this vehicle. Make sure the oil level is full. Is the vehicle ,making any tapping noises from the top end? ( valve train noise) If oil level is ok, you may have a defective oil pressure switch causing your symptoms. If the engine is abnormaly noisey it is possible there is no oil pressure and further diagnostics will be requred

1999 Chrysler... | Answered on May 23, 2015

Not finding what you are looking for?

644 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Town & Country Chrysler

  • Town & Country Chrysler

Most Popular Question

remo remove shutdown code 99 chrysler

  • Cars & Trucks
Loading...