Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the owner literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit mst be entered within five seconds of the previous button press.
Do you know the original five-digit code ? You need the original to reset with a new one .
Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:
- Enter the factory set five-digit code (the keypad will illuminate when pressed).
- Press 1/2 within five seconds of Step 1.
- Enter the unique five-digit code.
The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:
- Enter factory set five-digit code.
- Press 1/2 within five seconds of Step 1.
- Press 7/8 and 9/0 at the same time within five seconds of Step 2.
The system now responds only to the factory set code.
If you do not know the code ,it is located on the vehicle security module located under the dash some where or in the trunk . Sorry I can't be more specific ,my service info doesn't show sable .