20 Most Recent
2001 Ford Taurus - Page 8 Questions & Answers
How to remove the serpentine belt
depends on vehicle. but for most you just need a wrench to take tention off the tentioner and remove belt. it does help if you borrow a tentioner tool from local parts store.
How do i find the KAPWR circut
Replacing parts to fix a fault can cost you a lot of money, and still not fix the fault. A scanned code tells where the fault may be ,but not which part to replace. Google ( Ford P1605 Code - PCM Keep Alive Memory Error). for more info.
Radio flashes PROTECT
Check you user guide for resetting the radio code. Your dealer (or the previous owner) should have given you the code. It may be in your radio user manual.
Is this the original radio unit or an aftermarket radio unit?
Are 1999 parts interchangable? I am scrapping a 1999 and want to keep parts that will work on the 2001
no,only from 2000 back and then everything changed,but,if it looks the same then keep it,your best bet is to search for the parts that you want to save,if they say 99 to 2001,then it will match,so,find an auto parts store online,type in the part and check it,its about all you can do,but,it will be the correct info that way.
I have a 01 ford taurus whit p0705 transmission
Code P0705 - Transmisson Range Sensor Circuit (PRNDL Input)
The transmission range switch detects the selector lever position and sends a signal to the TCM.
The park/neutral position (PNP) switch includes a transmission range
switch. The transmission range switch detects the selector lever
position when the shift lever is in the N or P shift position and sends a
signal to the Transmission Control Module (TCM).
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
Possible causes
- Open or short park/neutral position switch circuit
- Poor park/neutral position switch circuit connection
- Misadjusted park/neutral position switch
- Park/neutral position switch may be faulty
Keep us updated (remember to rate thsi answer).
One windshield wiper not working
Maybe the nut that hold the wiper to the linkage is either loose or stripped? The linkage itself is bad?
I think your wiper motor is fine because the passenger side works and uses the same motor to move the wipers.
Steerin wheel hard to turn
Hi I can't give sn accurate answer with knowing what the vehicle is! A few things you can check if hydrolic stering. Is there fluid in the resivour? Is the belt turning the pump?? Are there any visible leaks??? If its electric stering are there any lights on the display, if so go to a mechanic to get it diagnosed. Regards Jim...
Not finding what you are looking for?