The transfer case shifts to both high and low range but the front hubs don't lock in. Are there...
(More)
The transfer case shifts to both high and low range but the front hubs don't lock in. Are there common problems to this?
pushed clutch in and petal stayed on floor. vehicle is still in gear. clutch is realatively new and...
(More)
pushed clutch in and petal stayed on floor. vehicle is still in gear. clutch is realatively new and didn't have any problems untill i pushed it in to shift.
i have a 92 bronco and iam putting different doors on it that have power windows locks and...
(More)
i have a 92 bronco and iam putting different doors on it that have power windows locks and mirrors.can u help me with the wiring
I get axle lube on the passenger front wheel mag.It takes some timeafter cleaning the wheel 3-400...
(More)
I get axle lube on the passenger front wheel mag.It takes some timeafter cleaning the wheel 3-400 miles.
my scaner give me de code -172 ego not switching lean exhaust bank 1 -136 no ego (h0o2-1)...
(More)
my scaner give me de code -172 ego not switching lean exhaust bank 1 -136 no ego (h0o2-1) switch-lean exhaust (bank 2) -335 egr (pfe-dpfe) signal out of range -and exhaust precsure higt or egr (pfe) signal hiht my car is a 1994 ford explorer------ 4.0
Rganks for the input, I did do that and found out that there is a fuel pump relay on the passenger...
(More)
Rganks for the input, I did do that and found out that there is a fuel pump relay on the passenger side under the dash. It had triped for some reason, closer inspection found a exposed wire. it took a whole 2 seconds to fix. Go figure Thank you for responding Cgris
I just got a bronco from my parents and its been sitting around... Im not really a car person and...
(More)
I just got a bronco from my parents and its been sitting around... Im not really a car person and need advice on what to look for and what kind of part replacements im going to need to look for.
Having MUCH difficulty with one of the tiny bolts next to the ABS sensor on the front left side of...
(More)
Having MUCH difficulty with one of the tiny bolts next to the ABS sensor on the front left side of bronco when trying to remove- need to remove to get to ball joints, but it is an odd size and not enough room to get too it for the force needed to get it off- any suggestions?
Is there any way, other than cutting the blasted thing off, to get the tiny little bolt off? My wife...
(More)
Is there any way, other than cutting the blasted thing off, to get the tiny little bolt off? My wife is threatening to blow the 95 bronco up if I don't get it fixed soon... All I wanted to do is replace ball joints, but this bugger won't come off!
i have an acceleration problem my truck gurgles when i take off but after im moving i can accelerate...
(More)
i have an acceleration problem my truck gurgles when i take off but after im moving i can accelerate with no problems.....any ideas?