20 Most Recent
1997 Dodge Neon Questions & Answers
Check engine light on displaying P1494, P1495 and oxygen sensor
code p 1494 refers to EVAP system leak detected
p1495 is EVAP solenoid /valve fault when searching for fault codes go to the browser page and type in --- fault code ( what ever code you get -- there are plenty of pages describing the fault and how to fix
one entry for each code
How to burp the cooling system a 97 neon
Just Crack it up take the cap off and let it run for a while if it has air in it you should see bubbles coming out.let it run for 20 minutes like that.
Hope this helps.
Hi i have a 97
It could be the Crankshaft Position Sensor, if you want another guess.
How to install a crank sensor on a 97 Dodge neon
the crank sensor is located on the back of the engine above the oil filter. remove the connector and the bolt that holds it in (only one) and remove with a twisting motion. try not to pry it because they can break off in there!!!
Where's the ignition module location on a 1997 Dodge Neon?
the ignition "control" module is internal to the engine control module. however the ignition coil is mounted right on top of the engine on the valve cover. don't forget to unlock the lock on the connector before unplugging it or you might break the connector trying to unplug it
Not finding what you are looking for?