http://www.fixya.com/cars/p695501-chevrolet_1996_blazerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 06 Dec 2009 02:21:03 GMT80http://www.fixya.com/support/t3556433-loosing_radiator_water_no_heat_fromLoosing radiator water and no heat from heaterSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3567279-turck_will_not_start_seemsthe turck will not start. there seems to be a problem with the fuel somewhere. i have changed the fuel pump relay and it ran fine for a day.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3517596-when_crunk_in_morning_makeswhen i have crunk my 1996 chevy blazer with the 4.3 v6 it in the morning it makes a knocking sound for about 10 seconds.It sounds as if a ball pean hammer is tapping something aluminum real hard.oil pressure is 55 to 60 psi when cold and first...Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3540829-4x4_will_not_engage_no_vacuum_hose4x4 will not engage,no vacuum at hose or diaphram where the cable isSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3529447-not_getting_fuelNot getting fuel from the tank to the filter?Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3446808-96_blazer_wont_start_just_cranks_butMy 96 blazer wont start it just cranks but wont start?Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3528873-chey_blazer_1996_slow_whenmy chey blazer 1996 has a slow take of when i'm going up a hill. the power seam like its not there then it picks up speed afterward. the check engine lit comes on sometimes afterwards.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3525481-tranny_stopped_pulling_while_car_runningTRANNY STOPPED PULLING WHILE CAR WAS RUNNING 1996 BLAZER 4BY 4Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3522003-will_caster_camber_adjustment_boltswill the caster and camber adjustment bolts cause a popping noise while turning. My ball joints are fine, no play in the box hardly, new pitman and idler arm, what else would pop. I have been told the adjustment bolts, control arm bushings and body...Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3514957-ran_out_gas_in_96_chev_blazerRan out of Gas in 1996 Cheverolet Blazer and the tank has been refilled back up, but the vehicle will not start even after failed attempts to prime it. So, how do I get it started.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3517118-new_idler_arm_pitman_arm_ball_jointsNew idler arm, pitman arm, ball joints, and greased everything up but their is popping noise when turning or sometimes when hitting a bump. One mechanic told me it was the torsion bar but others describe a bolt.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3512515-will_not_shift_into_parkit will not shift into parkSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3503424-1996_chevy_blazer_4_3_keeps_going_into1996 chevy blazer 4.3 keeps going into 3rd gear limp mode and throwing just about every code imaginable!!! have noticed there is a dead 12g wire that goes into the computer that has no power going thru it.....any suggestions? 2-3 shift solenoids have...Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3478777-replace_rear_wiper_1996_chevyHow do I replace the rear wiper on a 1996 Chevy S10 BlazerSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3446066-1996_chevy_blazer_will_not_go_into_4wd1996 chevy blazer will not go into 4wd hi but it will go in to 4wd lo. when you push the 4 Hi button it just flashes and then does nothing.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3482032-no_high_beam_lights_1996_cheve_k5have no high beam lights on my 1996 cheve k5 blazer changed blubs no luck low beams workSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3476543-1996_chev_blazer_idles_rough1996 chev blazer idles rough when placed into drive.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3476513-1996_chev_blazer_idlesmy 1996 chev blazer idles rough wjen put into driveSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3474849-locateing_fuel_pressure_regulatorlocateing the fuel pressure regulatorSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3447973-chevy_blazer_pulling_boggingEvery time I start my 1996 Chevy blazer and put it into Drive, it starts to "bog" or hesitates a bit, like it's about to die, but it doesn't. I took it to a friend of mine who works on cars and he has no idea what it could be. My only option is to go...Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3440674-when_truned_heat_no_heat_but_ac_worksWhen truned to heat no heat but ac works greatSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3245620-1996_blazer_dome_light_stays1996 Blazer dome light stays onSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3418141-96_chevrolet_blazer_problemI have a 96 chevrolet blazer and I have problem to star it just crank, to be able to start the blazer I have to put gas in the carburator and then work just fine I don't think is the gas pump.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3401491-1996_chevy_blazer_4_3_v6_engine_whenI have a 1996 chevy blazer 4.3 v6 engine. When I attempt to turn key 2-4 times the starter kicks outthen will start after. whether the vehicle is warmed up or just started.Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3395608-fuel_filter_96_blazerwhere is the fuel filter on a 96 BlazerSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3383766-disable_alarm_systemhow do you disable alarm systemSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3383707-will_transmission_from_1999_chevy_blazerWill a transmission from a 1999 chevy blazer work in a 1996 chevy blazer?Sun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3374300-tailgate_window_opentailgate window won't open with remote or the button on the dash not getting voltage to the solinoid mounted in tailgateSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3365521-any_sensors_need_replacedis there any sensors that need to be replaced if engine is overheating.water is flowing good! new clutch fan and thermostat. the suv heats up to 210 and over if i go 2 milesSun, 06 Dec 2009 02:21:03 GMThttp://www.fixya.com/support/t3370786-code_cylinder_1_misfire_96_chevyhave code for cylinder #1 misfire on 96 chevy blazer engine runs rough at idle what do i need to doSun, 06 Dec 2009 02:21:03 GMT