http://www.fixya.com/cars/p695498-chevrolet_1995_s_10_ca_editionSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 03 Dec 2009 05:24:35 GMT80http://www.fixya.com/support/t3557052-need_diagram_fuel_system_1995_chevy_s10Have a gas leak near the front of cab of the truck and need a diagram of fuel system for 1995 chevy s10 to see how hard it would be to repair/replace the fuel line?Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3393616-big_engine_compartment_u_needhow big of an engine compartment do u need for a chevy 350Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3522504-not_get_lock_ring_offcan not get the lock ring off on the fuel pumpThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3512227-shaking_in_3rd_gearshaking in 3rd gear shakes and shimmys when I slow down to second and first gear.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3498181-truck_will_not_start_sometimes_but_justmy truck will not start it does sometimes but just recently it started giving me trouble. only starts once in a while and it doesnt even turn ver just clicksThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3459953-1995_s10_pickup_4wd_just_replaced_fuel1995 s10 pickup 4wd, just replaced fuel pump as truck would just quit. Check Ignition control module, its okay. Truck started once after replacing the fuel pump, now won't start at all. No buzz sound at fuel pump (to prime). Looking into Oil...Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3451429-1995_s_10_left_brake_light_doesntI have a 1995 s-10 and left brake light doesn't work. Replace bulb and fuse. Tail light works. Right brake light works. Would this be a wiring problem or what?Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3448322-car_smoking_no_coolant_put_put_coolantcar was smoking- no coolant- so i put put coolant. still car wont start. put oil. still no start. tried jump starting still no start. car wants to start and sound like it too but wontThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2292503-1995_chevy_4_3_idling_2300_rpms4.3 vortec cpi motor idling at 2300 rpms and cannot get it to kick down,got 5 amps at air contol ,tps, and map senser.spray carb cleaner around intake no leaks and no vacume leaks.does anyone have any ideas?Thank youThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3410928-need_detailed_directions_remove_starterneed detailed directions to remove starter from chevy s10Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3386924-95_s10_2_2_mfi_systemI have an 95 s10. It has the 2.2 mfi system. Having idle problems as well as missing in low RPM situations. Will miss a little in overdrive, will down shift and will stop. If floored though will start missing also. Truck runs fine. Checked plugs...Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3373726-1994_chevy_s10_pick_up_4_cylinder1994 Chevy S10 Pick-up 4 cylinder, sloshing noise, no heat......is this a heater core problem?Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3320977-constant_ticking_in_trannyconstant ticking in trannyThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3207249-1995_chevy_4_3_runs_smooth_but_idles1995 chevy 4.3 runs smooth but idles rough during long stops i have replaced the iac egr syder fuel filter plugs wire cap fuel pressure 55 replcaed vaccum lines dont hear any leaks replaced air temp sensorthe van runs very smooth as long as your...Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3246435-need_teke_oof_air_bag_s10_chevy_1995need teke oof the air bag s10 chevy 1995Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3216886-haveing_trouble_getting_heater_core_95haveing trouble getting to my heater core on 95 s10 pickupThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3095723-95_blazer_v6_4_3_in_amI have a 95 blazer with a v6 4.3 in it and am having a problem. Runs great and then service engine light comes on and when I slow down it lopes in idle. Run fine at high rpms. When I shut it down it resets and is okay for a hundred miles or so and...Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3097911-replacing_o_rings_95_chevy_s10_2_2replacing the o rings on a 95 chevy s10 2., you can smell gas after truck has been running. where is the fuel injectors located.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3065401-key_dont_turnthe key wont turn in ignition.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t1789266-vortex_v6_intake_gasketcoolant in oil. changed oil and filter, no signs of coolant but oil pressure drops to red zone at idle when hot. Runs fine, no smoke or misfire.oil pressure is normal when cold.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t3027463-am_looking_front_bearing_assemblyI am looking for front bearing assembly diagram for a S10 Blazer (1995)Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2996138-finding_turn_signal_flasher_95_s_10_4wdfinding turn signal flasher on 95 s-10 4wd 4.3Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2917232-1995_chevy_blazer_4_3_highi have a 1995 chevy blazer with the 4.3 high output vortex motor no cat in it did the fix to the 02 so it would read right just changed the fuel pressure regulator and now it blows white smoke and runs like **** any help would be greatly appreciatedThu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2897133-1995_chevy_s_10_starts_dies1995 Chevy S-10 starts then dies. Don't know what the problem is.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2887082-cracked_cast_piece_between_transmissionCracked cast piece between transmission and transfer case on a 95 S10 blazer.Need to know the name of the piece.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2873554-chevy_s10_stalls_when_weti have a 1998 s10 every time it rains or is damp out the truck sputters and stalls. It has no power and takes about a day to clear up . After it clears the truck still seems to have no power can any help.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2867670-installed_clutch_kit_now_wont_go_intoinstalled new clutch kit and slave cylinder and now it wont go into gear hardly at all. Have bled and bled the slave cylinder over and over but to no avail. What could be causing the problem.Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2866313-intake_gasket_1997_s_10_4_3chevy s-10Thu, 03 Dec 2009 05:24:35 GMThttp://www.fixya.com/support/t2775005-chevy_s_10_pickup_loses_all_power_whileChevy s-10 pickup loses all power while driving. Power used to kick back on after a few seconds. Recently the power did not kick back on. Now the engine will not start. The battery and alternator have been replaced. The truck will not start. Seems...Thu, 03 Dec 2009 05:24:35 GMT