<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>1992 Chevrolet S-10 Support</title><link>http://www.fixya.com/cars/p694032-chevrolet_1992_s_10</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate><ttl>80</ttl><item><title>ONE OF MY VACUUM HOSE FROM MY TRANSFUR CASE CAME</title><link>http://www.fixya.com/support/t3643384-one_vacuum_hose_from_transfur_case_came</link><description>ONE OF MY VACUUM HOSE FROM MY TRANSFUR CASE CAME OFF. I NEED TO KNOW WHERE THEY GO SO I CAN PUT IT BACK ON. 4 WHEEL DRIVE IS PUSH BUTTON.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>Which piston is #1, #2, #3, and so on on a 92 Chevy S-10 4.3 V6?</title><link>http://www.fixya.com/support/t3635889-piston_1_2_3_92_chevy_s_10_4_3_v6</link><description>I found the firing sequence of my 4.3 V-6 1992 Chevy S-10 pick up.  However, I don't know which piston (or port for the spark plug) is numbered 1-2-3-4-5 and 6?  If I were sitting in the driver seat Which would be 1, then 2 and so on?</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>i need a diagram for the drive belt for a 1992</title><link>http://www.fixya.com/support/t3632096-need_diagram_drive_belt_1992</link><description>i need a diagram for the drive belt for a 1992 chevy s10 blazer with ac 2 wheel drive</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>I have a 1992 Chevy S10 4.3, it will not</title><link>http://www.fixya.com/support/t3425026-1992_chevy_s10_4_3_will_not</link><description>I have a 1992 Chevy S10 4.3, it will not start....there is power going to it all the lights come on and the radio ... etc.... but it just wont start...there is no click ...no thing...i checked the wire that goes to the starter from the battery it...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>problems during excelaration</title><link>http://www.fixya.com/support/t3556247-problems_during_excelaration</link><description>problems during excelaration act's like it' going to cut out during excelaration seems like maybe a fuel problem it seems like it might be miss firing</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>92 chevy s10 4x4 4.3L manual transmission no 3rd gear</title><link>http://www.fixya.com/support/t3548248-92_chevy_s10_4x4_4_3l_manual</link><description>92 chevy s10 4x4 4.3L manual transmission works in all gears but 3rd. will not shift into 3rd gear.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>clutch want ingadge all the way.\r\nHow do I get</title><link>http://www.fixya.com/support/t3531998-clutch_want_ingadge_all_way_r_nhow_get</link><description>clutch want ingadge all the way. How do I get all the air out. 1992 S10 after installing new slave cyl.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>how do you instile a new heater core and remove</title><link>http://www.fixya.com/support/t3515624-instile_new_heater_core_remove</link><description>how do you instile a new heater core and remove the old one.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>car died while driving</title><link>http://www.fixya.com/support/t3398724-car_died_while_driving</link><description>I was driving and mycar died it sounded like it lost compression i toke off valve cover and cranked there is no movement by the valves</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>i have a bad water leak coming from the lower</title><link>http://www.fixya.com/support/t3396294-bad_water_leak_coming_from_lower</link><description>i have a bad water leak coming from the lower intake manifold.i removed the intake and its badly corroded.is replacing the intake worth the price of a new one ?the only ones i can find are edelbrock .and run about 330 bucks.can i find one cheaper...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>I have a 92 manusl single cab chevy s10. I was</title><link>http://www.fixya.com/support/t3345653-92_manusl_single_cab_chevy_s10</link><description>I have a 92 manusl single cab chevy s10. I was going to work the other day and saw my oil pressure had dropped a lot. by the time I got to work which is not even a mile away I had no oil.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>my timing belt broke i cant get it back in time, a</title><link>http://www.fixya.com/support/t3337899-timing_belt_broke_get_back_in_time</link><description>my timing belt broke i cant get it back in time, a macanic said my engine is blown</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>1992 Chevy S10 has no heat, Radiator is full of</title><link>http://www.fixya.com/support/t3337291-1992_chevy_s10_no_heat_radiator_full</link><description>1992 Chevy S10 has no heat, Radiator is full of coolant, hoses to heater core are warm, cold/hot lever is operating, but still no heat.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>I have a 1992 S-10 pickup 2WD with a 2.5 L engine</title><link>http://www.fixya.com/support/t3295855-1992_s_10_pickup_2wd_2_5_l_engine</link><description>I have a 1992 S-10 pickup 2WD with a 2.5 L engine that will start but won't stay running?</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>gas gauge stuck past full when truck is on</title><link>http://www.fixya.com/support/t3290927-gas_gauge_stuck_past_full_when_truck</link><description>when the truck is sitting for a couple of hours i can see the orange gauge notifying me how much gas i have but as soon as i start it up it shoots past a full and stays? doesnt make sense because i have replaced the gauge cluster and its doing the...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>I have what looks and feels like axle grease</title><link>http://www.fixya.com/support/t3239277-looks_feels_like_axle_grease</link><description>I have what looks and feels like axle grease coming out of my boot for the cv joint when I noticed it was when my right front tire started tilting inward what does this mean?</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>4lo on  92 s10 works fine but 4hi wont engage at</title><link>http://www.fixya.com/support/t3229815-4lo_92_s10_works_fine_but_4hi_wont</link><description>4lo on 92 s10 works fine but 4hi wont engage at all lights on switch works just wont lock in an stay green</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>Vacum hose problem</title><link>http://www.fixya.com/support/t3161061-vacum_hose_problem</link><description>I have a 92 4.3 s10 pickup that has had all the vacum hoses cut off.I need to find the right hose routing for my truck.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>my 1992 chevy s-10 blazer, starts, but dies out when in gear.</title><link>http://www.fixya.com/support/t3114696-1992_chevy_s_10_blazer_starts_but_dies</link><description>my 1992 chevy s- 10 blazer starts but idles rough, and dies when put in gear.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>runs like it has a vacum leak</title><link>http://www.fixya.com/support/t3093636-runs_like_vacum_leak</link><description>runs like it has a vacum leak</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>I have a 92 S10 that does not get fuel. the fuel</title><link>http://www.fixya.com/support/t3022712-92_s10_not_get_fuel_fuel</link><description>I have a 92 S10 that does not get fuel. the fuel pump is working the injector relay seems to be working the injector gets power to one line on each injector and i can hear the injectors hum when i turn on the key the computer was damaged by water and...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>1992 s-10 misfire after new plugs</title><link>http://www.fixya.com/support/t3002610-1992_s_10_misfire_after_new_plugs</link><description>i have a 1992 s-10 4.3 and i just put ac delco plugs in it and gapped them to .035 like it says to. now it has a missfire at idle. the plugs that came out of it where the same type but they where gapped around .045-.050</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>2001 4.3L chevy s10 running hot</title><link>http://www.fixya.com/support/t2951840-2001_4_3l_chevy_s10_running_hot</link><description>I replaced a cracked radiator, radiotor cap, water pump too and the engine is still getting up to about 240. I have also replaced the catalytic converters. I thought there might be an are bubble in the engine so I ran it jacked up so the radiator was...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>Radiator overheating</title><link>http://www.fixya.com/support/t2946610-radiator_overheating</link><description>I have a 92 Chevy S10 Blazer 4 WD 6 cylinder 4.3L Automatic trany. I am having overheating problems; I had to replace the Radiator (17 yrs old) so I also replaced the top hose, thermostat and the cap. The overheating started after replacing...</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>cant get a spark at the plugs. ive changed plugs,</title><link>http://www.fixya.com/support/t2927184-get_spark_plugs_ive_changed_plugs</link><description>cant get a spark at the plugs. ive changed plugs, wires, and distributor and button. what could cause this</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>no 12 volt coming out of fuel pump relay. has fire</title><link>http://www.fixya.com/support/t2925794-no_12_volt_coming_out_fuel_pump_relay</link><description>no 12 volt coming out of fuel pump relay. has fire going in. relay clicks like it is suppose to but nothing out to fuel pump.</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>92 chevy s-10 . the speedometer goes everywhere after u go above</title><link>http://www.fixya.com/support/t2920415-92_chevy_s_10_speedometer_goes</link><description>i have a 92 chevy s10. the seedometer is messing up . it works good till u go faster than 60. after u go above that it goes al over. i have already replaces the whel. speed sensor. what do i do next?</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>the speed needle bounches everywhere after u go</title><link>http://www.fixya.com/support/t2920377-speed_needle_bounches_everywhere_after_u</link><description>the speed needle bounches everywhere after u go above 60. i already replaced the whel speed senosor what do i do next?</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>putting in new antena</title><link>http://www.fixya.com/support/t2917224-putting_in_new_antena</link><description>putting in new antena</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item><item><title>transmission fliud overflow</title><link>http://www.fixya.com/support/t2914794-transmission_fliud_overflow</link><description>transmission fliud overflow</description><pubDate>Thu, 17 Dec 2009 16:25:13 GMT</pubDate></item></channel></rss>