20 Most Recent 2000 Mitsubishi Diamante Questions & Answers


Best Manuals You just go to the link I attached I'm sure you will get the solution of your problem

2000 Mitsubishi... | Answered on Dec 27, 2017


traction control are sensors at the wheel or speed sensor
magna forum
http://www.aussiemagna.com/forums/archive/index.php/t-79951.html

have a read of this diamante car owners forum
http://www.mitsubishi-forums.com/12-diamante-magna-sigma-verada-forum/

a repair manual would help

2000 Mitsubishi... | Answered on Feb 28, 2017


Battery good , cables and connections ? Voltage drop test starting circuit . Find a wiring diagram at http://www.bbbind.com/free_tsb.html Your vehicle has no relay ! Try wiggling the gear selector from park to neutral . Check B+ voltage at the park neutral safety switch . When you turn key to start B+ voltage goes to the neutral safety switch , if switch is good ,B+ voltage goes through the switch if in park or neutral to the solenoid on the starter . IF all is good starter energizes and spins the engine over . Starter Voltage Drop If you can't fix it with this info , your best bet have it towed to a qualified repair shop .

2000 Mitsubishi... | Answered on Feb 18, 2017


By the sound of your problem your vehicle has an electronic automatic gear box but correct me if I am wrong..Now this can be caused due to a faulty electronic part but I cannot guarantee this.It may need a diagnostic tool hook up to the car to read the error code.(if it's giving a check engine light )

2000 Mitsubishi... | Answered on Mar 13, 2015


behind the bumper somewhere

2000 Mitsubishi... | Answered on Nov 22, 2014


have the heater control motor checked

2000 Mitsubishi... | Answered on Oct 22, 2014


the following checks need to be made.
All listed components are all share a fuse , and all share the same ground, G200.
Check the fuse/circuit breaker for power on both sides, if OK, follow the harness to connector C214 a 12 pin connector to the right of the glove box opening to see if there is a problem there.
Ground 200 is located on the toe plate at the front edge of the passenger's front door. Check for bad connection there.
If everything is good up to this point you will check The Black/White wire that runs through the main harness under the dash, and splits into several Black/White wires at splice S245, in the main wire harness under the driver side of the dash.

Info from: http://www.xcardiag.com/

2000 Mitsubishi... | Answered on Apr 08, 2014


may be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here:http://www.xcardiag.com/

2000 Mitsubishi... | Answered on Apr 08, 2014

Not finding what you are looking for?
2000 Mitsubishi Diamante Logo

155 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Diamante Mitsubishi

  • Diamante Mitsubishi

Most Popular Question

electronic door switch open gas door or

  • Cars & Trucks
Loading...