20 Most Recent 1998 Mitsubishi 3000GT Questions & Answers

You need to run an OBD2 fault code test with a code reader, that is the number one thing that must be done since this engine is computer controlled.

bad ground or relay

I have a similar problem. It runs a while from cold and then just cuts. I have have changed the TB twice now with no change. I cant afford a new TB. Did you find a solution to your problem?

Hi recheck connections is there a small wire damaged or left off at the plus terminal. If all good check main fuzes.

INFINITI WILL HAVE TO GIVE YOU THE CODE.. YOU CAN TRY CALLING YOUR LOCAL DEALER AND SEE IF THEY CAN GIVE IT TO YOU, OR YOU MIGHT HAVE TO TAKE IT IN. THEY DIDN'T GIVE YOU A RADIO CODE CARD IN THE OWNERS MANUAL? EITHER THE FRONT OR BACK OF THE BOOK

the fuel pump is electrical high pressure pump and is located either next to the fuel tank or inside the fuel tank depending on the exact model the pump is cylindrical and if outside the tank will have wiring connector running to it

you have a grounding issue bad ground probably a melted wire shieldingcheck accordingly

The transmission is not going to change the vehicle has a internal mechanical failure,a new set of clutches and bands are going to be the solution

Is it not shifting or is it shifting?

START AT THE STARTER. CHECK YOUR BATTERY CABLES AND SOLINOID WIRE. AND CHECK YOUR CLUTCH SWITCH. ITS ON THE TOP OF THE CLUTCH PEDAL. IT IS WHY YOU HAVE TO ENGAGE THE CLUTCH TO START THE CAR.