20 Most Recent 2007 Mitsubishi Raider LS Questions & Answers

you might want to try to prime the fuel filter. Open the bleeder - 10mm- and press the pump. See if you have air in the line.

Connect a scan tool and the DTC code will tell you the issue.. https://www.google.com/search?q=4m40+engine+neutral+light+blinks+continuously ..

Check the clutch disengaging properly ...............

Some things to check:

• CV axles (a telltale sign of bad or wearing axles is noise)
• Suspension bushings (sway bar bushings, etc)
• Motor mounts (including transmission mounts)
• Control arms/ball joints (some aftermarkets fail out of the box)
• Strut mounts (worn or faulty strut mounts can cause noise)
• Proper torque spec for all suspension components

under left side of dash

follow this link and click on torque tables and look up your vehicle http://www.speedwayautoparts.com/index35.htm

Question edited for clarity. No one has documented how to do it, so basically you remove the door panel and look. There are spares and parts schematics in the link. https://www.google.com/search?q=mitsubishi+fuso+fm557+replace+window+regulator ..

You have a module issue, but which one, Throttle Position sensor, Throttle body, MAF, Crankshaft, or Camshaft, or a bad connection. An auto electrician with a pro grade scan tool can diagnose. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

can be something other than switch -----------http://mmc-manuals.ru/manuals/pajero_sport_iii/online/Service_Manual/2017/35/html/M135202550030702ENG.HTM

Question edited for clarity, turned around, add magic word. In the link https://www.google.com/search?q=Mitsubishi+M3+Torque+specs+for+L3G14+head ..

Well, you need 3 things for an engine to run; air, fuel and spark. Air from the air ducting through the air filter, the fuel from the pump usually in tank to fuel filters {pressurized} into the injectors for fuel. Spark is a bit trickier; you have a cam sensor, crank sensor, coil packs, spark plugs. There are more components in each of these 3 classes so unless you are familiar; it's best to take it to a mechanic.

250nm

What's code 19 Line PRS.SHT on lancer 2005 ?

Haynesmanual at partstore

Yes me! https://www.google.com/search?q=Mitsubishi+FUSO+8M20+CYLINDER+HEAD+bolt+TORQUE And Videos as well ..

No they are crooks! The genuine part from Mitsubishi is $120 and it looks like you could do it yourself. Where is the transmission fluid pressure sensor? The pump pressure switch is located on the transmission housing next to the pump. The switch lets the computer know what the pressure is coming from the pump when the engine is running. The servo pressure switch is located on the housing near a band or servo in the transmission. Oct 11, 2016 Videos https://www.google.com/search?q=2016+mitsubishi+outlander+transmission+fluid+pressure+sensor+location ..

You can't disable Car Alarms and Engine Immobilizers. They are there SPECIFICALLY to stop what you are trying to do. There are 2 computers ECM/BCM, an Anti Theft module and numerous sensors there to stop you. You have to fix the problem, not find away around it. https://www.fixya.com/cars/r26142776-want_bypass_vehicle_security_system and https://www.google.com/search?q=mobile+auto+electrician+near+me or https://www.google.com/search?q=mobile+auto+locksmith+near+me depending on what your issue is?