20 Most Recent 1980 Lancia Beta Coupe Questions & Answers

The gear shifter doesn't connect to the clutch, the clutch pedal and clutch release fork connect to the clutch. The shift linkage connects to the transmission through a 3 part lever with 2 adjustment points.

What year and model is your beta? You can download wiring diagrams from the Lancisti site.

try any auto upholstery place that does upholstery and trim

Check MAF mass air flow sensor, and also TPS throttle position sensor.

Hi,
a Lancia has an automatic engine advance to ensure that the air conditioning does not stall the engine.
I am afraid you will have to clarify your problem somewhat in order to obtain assistance.

Is it a Lancia Beta,...Lancia Scorpion, a four cyl fiat engine, a V4 Lancia engine? is it a Lancia Flavia?
A Lancia Fulvia?

Thank you for your enquiry.

GET A GOOD FUSE TESTER, TEST EVERY FUSE . FUSE BOX UNDER THE HOOD INSIDE THE CAR WITH IGNITION SWITCH ON. THE FUSES CAN BE TESTED IN THE BOX THERE ARE TEST POINTS FACING OUT. GOOD LUCK, DR. VOLT

In THIS LINK could find information about Lancia Kappa 2.0 Sedan, itsa possible thet helpfull as referenece guide.

The general detsila and specs in here -->> specifications/models/car/?car=9933

Keep in mind that the Lancia is one model manufacturated by Lancia Italy, then try to look in the site or in lancisti.net/forum/content.

I hope helpfull with this references. Good luck.

go on line and find the nearest alfa romeo car club kdc744

Look over the web

yes you can you just need to know what you're doing. I put a toyota 5A 1500cc in an old volvo once and it worked

Most towing advise works to the 85% rule. As long as the maximum weight to be towed is 'Not' greater than 85% of the vehicles maximum 'kerb' weight, (maximum gross weight). The Musa should not pull over 1000kg, (1 metric tonne). A braked trailer will allow that weight to rise by about 200kg.

1995 cc.

89hp