20 Most Recent 2007 Hyundai Accent GLS Questions & Answers

dose the key turn in the lock you could have a worn door lock where the plastic link bar on the back of the barrel gets a bit worn and just dosnt pull the link bar up enough , you realy need to remove the door pannel and really look at whats happening to the lock from inside the door checking the movement when you turn the key to unlock position you may even take up any play on the link bar to the latch lock by putting a slight bend in the bar to take up the slack

Could be many things. Could be spark plugs, ignition coil,fuel filter, etc

Omg worn out rotors will not make your steering wheel make rubbing noises. Some ppl should just read and not write. There is a rubber boot that your steering shaft goes through on the fire wall .sometimes it dries out .if you lube it with silicone paste .not petroleum based.it might help.do it from inside the car.under dash .or it might be clock spring .or rotary coupler in steering wheel. You might just try to lube .the hen if it don't work take to dealer.if it don't help.

This is generally due to the "tracking" being off. Happens on your front wheels. It means that the tyres are not pointing in the same direction (but you would not notice it by looking at them). You will need to bring your car to a type repair centre and they can realign them. Not a big job.

run fault codes and find the fault (electrical--- leads ---fuel pressure ---injectors. Have a compression test done to check valve sealing.

First check to make sure it's not damaged - try asking at an auto parts store for lock cylinder grease, that's the most likely, but I doubt it's an oil issue on a 2007 - way too new. More than likely the problem is with the key or lock cylinder

Question edited for clarity. Question moved to model category. From what I gather from this video, it is a combined module ECM/TCM sharing the same box ECM on left and TCM on the right. There is a diagram showing it as well. https://www.google.com/search?q=2016+Hyundai+Accent+SE.+TCM+location https://www.2carpros.com/questions/2009-hyundai-elantra-tcm-location ..

the M/t box has 4th no a/t here as 4th period so must be manual transmission real photo blow is A/t BOX. START A POST MY CAR IS STICK SHIFT AND WIN.

a heater not turning on could be caused by a problem with the thermostat, a lack of coolant, or an issue with the heater control valve or blend door

what year car< 1994 to 2022+ sorry can't guess 28 years of car evolution. in what country. what engine is there losing said power , non told. so lacking all useful facts lets go generic, (gasoline only engines) USA only 1996 and up. 1: transmission fails to up shift, scan it. 2: engine spark is bad, misfires power loss, time for a spark and all filters turn up? 100k mile tune up scheduled skipped? 3: fuel bad, fuel pressure too log or too high , lost power. 4: sensors on engine failing , SCAN IT. MAP or MAF.

'year make model' in all questions please. Question edited and moved to Hyundai Accent. In the link https://www.google.com/search?q=H100+cylinder+head+bolts+torque ..

Did u ever get fixed? Cuz i have same problem. Was driving and it just died at the light and i changed camshaft sensor, battery, and now starter. Got the codes342 and now 343. Still wont start