20 Most Recent
2006 BMW Z4 3.0i Questions & Answers
Bmw trouble codes poo12
Likely the camshaft position sensor OR possibly a Vanos problem. The first is relative easy DIY the Vanos is more complicated. The Vanos will likely throw up a P0010 eventually.
Brake pedal drops very low on first press only
It is most likely you have air in the brake fluid. The first press of the pedal compresses the air and the effect lasts for a little while.
Another cause may be warped (bent) rotors, the pads can be pushed back into the calipers by the off center area of the rotor. This means that the pads have to travel further in order to contact the rotors when you press the pedal.
Remove seat belt
Hi Ray, Removal of the seat belts requires removal of the seats. Adjust the front seats to the fully backwards position and remove the fixing bolts and then unhook rails at the rear.You will notice a wire cable attached to each seat used to adjust the belt shoulder hight. This must also be disconnected. On later model vehicles there is an automatic retraction unit which pulls the driver and or passenger back into the seat in the event of the air bags being deployed. These connections must also be removed. If seats are electrically operated unplug all connectors. Remove seats and then gently remove plastic door pillar covers. (These are in two pieces for each front belt.) Removal will leave the fixing bolts of retractable part of the seat belt exposed. The buckle side is fixed with one bolt and has an electrical connection which must be disconnected. Hope this is of help? Regards John
Not finding what you are looking for?