20 Most Recent 2016 Kia Sorento Questions & Answers

There could be a few reasons why your car's crankshaft may not be turning at the correct speed. One possibility is that the engine may not be getting the fuel it needs to run correctly. If the engine isn't getting the fuel it needs, it may not crank properly or at all. Another possibility is that there could be a problem with the crankshaft itself. In this case, you would likely need to replace the crankshaft.

talk with a service center but I would guess it means icy road surface

Sorry common issue back light is burned out would likely have to replace the unit

There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few . reliable-store let me know if u need help thanks

That all depends on the sound and the symbol, I need specifics.

If that is a 2016 model you need to take it back to the dealer it is under warranty.

In the link and a video as well. NOTE: they are POUND INCH not Foot Pounds.

Torque Pattern for Valve Cover? - Kia Forum

kia-forums.com https://www.kia-forums.com > threads > torque-patter... Sep 17, 2013 - show the locations of the bolts on the "Cylinder Head Cover" --aka valve cover-- and they provide the torque at 35-52 lb-in (4-6Nm), but they ... Valve Cover Gasket help Apr 28, 2012 Torque specs and sequence for intake bolts Jul 10, 2022 Need Bolt Pattern for Valve Cover, please help? May 15, 2018 torque specs? Mar 20, 2017 More results from www.kia-forums.com ..

order parts remove door panel and replace parts

https://eautorepair.net/Marketing/Default.asp pay and read,

It's not complicated ! when you turn on the overhead light with one or either switch you see 2 lights. BUT there's another bulb between them that is the one that comes on with a door opening. Remove cover and replace the burned out middle bulb.

Question edited for clarity and typo. some help in the link. https://www.google.com/search?q=2016+Kia+Sorento.+4WD+actuator+replacement ..

Yes I have one.message me: [email protected]

It can only be a few things Gail. Fuse is the first thing to check. Then check the switch for power and continuity. You have changed the resistor, so we assume the new resistor is good. The only thing left is the blower motor itself. Remove it and add 12 volts to it.

Set the blower control on high with max a/c then try to tap on the blower motor and if it run or starts and stops replace the motor.

should be on the shifter ----check with your owners manual

https://www.obd-codes.com/p0016 https://www.obd-codes.com/p0018 these two links should help fix your problem

limited info generic answer ---wont complete the test ??? need more clarification --is the obdll not communicating --or is it failing do to not ready conditions --as to the way you wording your question would suspect some kind of ecu failure or harness

There is a short in the wires causing the fuse to blow. Check the wires at bend points and how they run to the fuse box. Something is probably pinching or rubbing the wire cause a short.

Yes you could BUT you will need to get a dealership to program the replacement BCM and PCM to match your cars electronics. If you don't the car will simply NOT start. Dealerships charge painfully expensive prices to do this.First check the fuses. Some features on a car share one fuse so when it blows you lose more than one thing. You could also get the vehicle plugged into a Diagnostic System or an OBD2 scanner to see if it is giving Diagnostic Trouble Codes, (DTC's). These will give clues to where the problem could be and if the Control modules are the problem.Try this website for the fuse box diagram.https://fusesdiagram.com/kia/fuses-and-relay-kia-sorento.html