hello
u'd need a proper manual for this in my opinion
like there are plenty of dealers and online shops that deal in those..
you can get some free at reliable-store and it;s actually really illustrative
Question edited for clarity.
Question moved to model category.
The year is needed, but here are some videos. If you mean 'how to get into' once you have removed it, break the paper seals and undo the screws, and remove the top.
Answershttps://www.answers.com > Auto > Asian Cars
Oct 22, 2022 - To remove the dash to get to the radio from a 2005 Kia Optima, begin by prying around the edge of the trim around the gear shifter. Then, remove ..
..
google
radio adapter harness by , Scosche
that name in japan means "little bit"
been there 10+ times, even into drydock. there,
that is there job to cure this and not need to wreck ANY factory harness with cutters.
This code does not refer to the O2 sensors. There is another sensor on the exhaust system called a "NOx" sensor. This monitors the Nitrogen Oxide levels in the Exhaust. Some vehicle manufacturers need to have the new sensor coded to the vehicles ECU to turn off the engine warning light.
It doesn't start because the immobiliser light is on and your vehicle is immobilised.
Did the battery go flat? Did you change the battery?
You need the dealership or an autoelectrician with a scan tool programming computer.
I have a 2015 kia sorento lx, I'm replacing the rear brake pads and I can't get the piston pushed in all the way in to get them on with the new brake pads