20 Most Recent 2011 Chevrolet Cruze Questions & Answers


Check the ground wire at the light, it might be corroded

2011 Chevrolet... | Answered on Sep 10, 2019


Ucadam... I'm having the same problem with mine. Makes 1 click but won't turn over. I tested the battery and its reading 12.4 v and when it does start the battery is reading 14v so I know it's not a battery or immobiliser issue... Did you end up finding out exactly what the issue was?

2011 Chevrolet... | Answered on Sep 10, 2019


Safety wise as long as the tires don't contact the vehicle in anyway you will be fine. The tire will be 1cm wider and slightly taller so the speedo will be affected slightly. Make sure to change all 4 if you are changing tire size.

2011 Chevrolet... | Answered on Apr 29, 2019


CRUZE94

2011 Chevrolet... | Answered on Mar 14, 2019


There's a website that has all this information about all this and manuals everything totally free there are many actually but I personally like few . reliable-store
let me know if u need help
thanks

2011 Chevrolet... | Answered on Mar 01, 2019


most are installed in a freeze plug location on the side of the engine block with the heater power cord attached to heater in block

2011 Chevrolet... | Answered on Feb 03, 2019


Sometimes Error 82, 84, etc. appears in almost new Cruze with low mileage. Error indicator often operates wrongly in this car, so if you feel your car's working properly you should clear an error list first.
There are two ways to clear the error list:
1. You should visit your authorized service centre so they could make computer testing and remove all errors.
2. You should remove contact from battery for a while. About 20 minutes to an hour should be sufficient. Actually in this way you may solve many malfunctions of car's electronics.
If the problem still persists, take it to your local Chevy dealer or servicer. A lot of times updating the software can fix the problem.

2011 Chevrolet... | Answered on Jan 17, 2019


Hello Kamran, Your vehicle output speed sensor is located on the transmission tail housing. You can find some images by searching "Google" - 2011 Chevy Cruze Output speed sensor location.

2011 Chevrolet... | Answered on Jan 07, 2019


Could be headlamp high beam relay located in the under hood fuse/relay box .

2011 Chevrolet... | Answered on Nov 04, 2018


Hi James as far as I can remember When lock appears you just leave the radio on whilst driving and it should clear after a few ignition cycles and a period of time elapses. Good luck

2011 Chevrolet... | Answered on Oct 27, 2018


the fans regulator may have gone bad and dont know when to really turn on or how fast to spin as a car gets hotter the compter tells the fans to go faster

2011 Chevrolet... | Answered on Sep 05, 2018


P2000 NOx Trap Efficiency Below Threshold Bank1
If you go to obd-codes.com you can read about this defect. The battery light is telling you that the charge in the battery is not a full charge. Have autozone or one like it to test the battery and alternator. I believe if you correct the battery issue the other problems should go away.

2011 Chevrolet... | Answered on May 21, 2017


Big heavy key bunch is it?
Swinging and bumping the trunk button?

2011 Chevrolet... | Answered on Apr 17, 2017

Not finding what you are looking for?
2011 Chevrolet Cruze Logo

356 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85161 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Cruze Chevrolet

  • Cruze Chevrolet

Most Popular Question

2011 chevy cruze high beams not working

  • Cars & Trucks
Loading...