Nationwide | 602-909-6450
Dodge Cars Troubleshooting, Manuals & Repair
Click here to get instant support from our best Experts!
Top Repair Providers for Dodge Cars
Featured Listing
Tips & How To Guides in Dodge Cars
Blower Motor Problems Most Late Model Chryslers.
The blower motor resistor is located inside the HVAC duct, (heating, ventalation, and cooling) on the passenger side footwell area. It is accessed...
written by rulrich0718
How to locat the battery on a dodge intrepid
If you are having trouble locating the battery on this car then all you need to do is remove the air filter housing and the battery is under this it...
written by pauldonp
How to change my automatice transmission fluid most vehicles.
A basic rule of thumb for changing the trans fluid is two fold. Time and condition. As a lubricant it should be changed about every 2 years or about...
written by autotherapis
dodge and chysler caravan gauges not working or bouncing
this is a communication ccd error code from pcm to transmission. i
have found a fix that will be easy and cheap if you have soldering
skills and a...
written by fingaz22
dodge and chrysler caravan code p1698 fix
this is a communication ccd error code from pcm to transmission. i have found a fix that will be easy and cheap if you have soldering skills and a...
written by fingaz22
What to do when your vehicle is running rough
Hi, now this tip covers both petrol and diesel injection engines: If your vehicle is running rough through all running temp range ie it runs rough...
written by pauldonp
fix you car by your self
hi, before you see any mechanic try these very simple things,check all oil levels,check all panel fuses inside you car and under you car hood,check...
written by wat_es
Trailer Wiring Standards (Color Codes/Plug Marks)
Hello all, For those of you that have or occasionally borrow trailers and look at the wiring plugs with disdain (I mean face it they don't make...
written by Mike258
cheap dent puller for small dings/dents
you can fabricate a dent puller to repair small dents on your body panel(s) just weld/solder a phillips head screw to a phillips screwdriver. a slide...
written by demonram440
Replacing Calipers
When replacing the calipers make sure the bleeder valve is on the topside, not bottom side. They are not marked on the caliper, nor on the box they...
written by Radio tech
Best Dodges
Recommended by Owners
Recommended by Owners
Top Car Experts
