AMC Cars & Trucks - Recent Questions, Troubleshooting & Support


hi Diego :>)

how fast is this car ? top speed: 164 km/h (102 mph) (©theoretical);
  • accelerations: 0- 60 mph 11.1© s; 0- 100 km/h 11.8© s (simulation ©automobile-catalog.com); 1/4 mile drag time (402 m) 18.4© s (simulation ©automobile-catalog.com) 1972 AMC Gremlin X 232 (man. 3) Detailed Performance Review
  • AMC Gremlin, 1972 MY brief technical data

    What body style? 2 door hatchback with 4/5 seats How long? 4096 mm How heavy? 1176 kg What size engine? 4.2 litre, 4228 cm3 How many cylinders? 6, Straight How much power? 112 PS / 110 bhp / 82 kW @ 3500 rpm How much torque? 264 Nm / 195 ft.lb / 26.9 kgm @ 2000 rpm How fast? 172 km/h, 107 mph engine rpm of the 1972 amc gremlin Google Search

    https://www.carfolio.com/specifications/models/car/?car=49907

    AMC Gremlin Wikipedia

    http://www.automobile-catalog.com/make/amc/gremlin/gremlin_x/1972.html

    AMC Cars &... | Answered 2 days ago


    The best solution you'll get from books at www.reliable-store.com

    These are books containing info on repair, service, troubleshooting, parts info, assembling dis semble, removal, error/fault cod es, wiring diagrams and everything on any vehicles cars, atv, trucks. forklifts, boats, excavators etc

    AMC Cars &... | Answered on Jun 20, 2018


    The best solution you'll get from books at www.reliable-store.com

    These are books containing info on repair, service, troubleshooting, p arts info, assembling dissemble, removal, error/fault codes, wiring diagrams and everything on any vehicle- cars, atv, trucks. forklifts, boats, excavators etc.

    AMC Cars &... | Answered on Jun 13, 2018


    1. Install the shift cable end of the shift cable to the transmission shift lever stud ball.
    2. Install the retainer to the shift cable and transmission bracket.
    3. Feed the shift cable through the floor panel.
    4. Lower the vehicle.
    5. Adjustment Procedure
      1. Ensure that the shift cable is not restricted.
      2. Place the shift lever into the NEUTRAL position.
      3. Position the shift cable to assume a natural routing. The shift cable must be free to move 20.0 mm (0.80 inch) axially during the adjustment under adjustment spring loads.
      4. Pull the cable end completely forward and release it. (When the cable is pulled completely forward and released, the adjustment spring will position the cable to its most rearward position.) Notice: Do not pull the shift lever ball stud forward of the transmission shift lever ball stud during installation. Pulling the shift cable end forward of the transmission shift lever ball stud before installing the shift cable end to the transmission shift lever ball stud will result in a poor adjustment.
      5. Connect the end of the shift cable to the transmission shift lever stud ball.
      6. Press the locking tab IN in order to secure the shift cable to the transmission bracket.

    1984 AMC... | Answered on Apr 21, 2018


    Fixya does not sell tranny rebuild kits.

    AMC Cars &... | Answered on Apr 12, 2018


    I tried the DIY service and repair manuals from
    a website and it actually helped me repair transmission problem in my jcb 3cx site-master. it wont move forward or reverse, engine is good both solenoids for forward and reverse work.
    I don't have much technical knowledge but I just followed it step-wise, and works perfect! got it from www.reliable-store.com

    AMC Cars &... | Answered on Mar 23, 2018


    Speedometer registered 90 MPH, anything after that was guessing.

    AMC Cars &... | Answered on Mar 08, 2018


    Depends on how it was equipped

    AMC Cars &... | Answered on Feb 20, 2018


    There is NOT a 9/16 nut or bolt on that it's metric!

    1983 AMC... | Answered on Jan 05, 2018


    torque converter has failed possibly . call a transmission shop

    1986 AMC... | Answered on Dec 29, 2017


    at 13.4 volts the alternator is NOT charging it has to be 14.5-14.8 volts to be charging
    next for the main problem
    there are 2 ignition circuits attached to the ignition switch
    the star position also allows power to the coil as it engages the starter
    releasing it back to run engages the 2nd circuit that allows power to the coil through a resistor or resistor wire
    if it stops after starting the problem is in that wire
    with out starting it put the key in the run position and read the voltage at the + point of the coil
    with no reading you have either a bad circuit or a bad ignition switch

    1983 AMC... | Answered on Dec 09, 2017


    6 cylinder or the 390 v8??

    AMC Cars &... | Answered on Dec 07, 2017


    What kind of Question is this ?

    1984 AMC... | Answered on Dec 07, 2017


    Falling off a Big Cliff is 120 MPH

    AMC Pacer Cars &... | Answered on Dec 07, 2017

    Not finding what you are looking for?
    AMC Logo

    281 questions posted

    Ask a Question

    Usually answered in minutes!

    Popular Products

    1975 AMC Pacer
    1975 AMC Pacer

    3 Questions

    1968 AMC AMX
    1968 AMC AMX

    -1 Questions

    1969 AMC AMX
    1969 AMC AMX

    -1 Questions

    1973 AMC Javelin
    1973 AMC Javelin

    -1 Questions

    Top AMC Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    yadayada
    yadayada

    Level 3 Expert

    79865 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4912 Answers

    Are you an AMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...