Question about Polaris ATV

Open Question

Do I have to bleed the brakes to add brake fluid to my 700 efi polaris

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Polaris 330 magnum drags like brake is on (it is not) even when throttle applied. EBS?


Hey Carl, Have you checked to see if the piston is sticking in the caliper or have you tried to bleed the system a little?
Try the system bleeding first... shouldn't take much if you have air in the line..(This is the same for the front or rear brakes.)
If you have been riding in mud, dirt, water, (I know-that's where we all ride!)..sometimes the piston (The brake caliper piston - NOT the engine piston) will get a tiny bit of corrosion around it and start sticking..this will cause the brakes to seem if they are on constantly.. IF your progress to diagnose this gets this far.. it is a fix for someone with some experience and knowledge. It requires removal and disassembly of the calipers, cleaning of the caliper, replacing the caliper o-ring, wet sanding the O.D. of the piston with brake fluid and 1200 grit sand paper, then a thorough cleaning of the caliper piston. Then reassembling all these cleaned (and the piston/o-ring lubed with brake fluid). installed back on the atv, ..ALL the brake system fluid should have been replaced and now the system bled completely. If you have more questions, reply to me.

Jun 12, 2017 | ATVs

1 Answer

Bleed brake line now they wont pup up


Mate did you make sure to keep topping up the brake fluid reservoir after bleading each brake......

Mar 13, 2016 | Polaris 2011 Scrambler 500 4x4

1 Answer

Rear brake won't bleed up put new pads on?


Does your model use hydraulic brakes? Many models don't. Check your manual and if you don't have one, go to the mfr's web site and download one. Otherwise, try it out. If the brakes seem to be working fine... why fix it, if it ain't broke! If the brakes, don't feel right, then you will have to bleed hydraulic lines and slowly top up with the proper viscosity and thermal property brake fluid. If there are problems getting brake pad pressure after filling the master cylinder and bleeding the brakes, the master cylinder will need replacing.

Mar 07, 2015 | Yamaha 2007 Grizzly 700 FI Auto 4x4...

1 Answer

How do I hook up the choke cable on a 2006 Polaris Sportsman 700?


Did your machine not come with one from the dealer? Is your machine fuel injected?

Nov 09, 2014 | Polaris 2006 Sportsman 700 Twin EFI

1 Answer

Does a bad battery have any bearing on the efi of a Polaris Sportsman 700 2004?


If motor has to constantly charge a battery while running, it could use a bit more fuel.

Oct 14, 2014 | Polaris 2004 Sportsman 700 Twin

1 Answer

How do I get at the front brake manifold that has rear brake line attached


should not be a manifold line should be direct from resevoir to front ,off hand lever.hand lever controls front and rear,pedal controls rear

Sep 15, 2014 | Polaris 2007 Sportsman 500 EFI Sunset Red...

1 Answer

2005 polaris 700 efi spark plug gap


for an informantion, please visit the website below. If you need more information about a specific electrical issue you can reach me at motor@motorpartstore.com

Jan 13, 2014 | Polaris 2005 Sportsman 700 Twin EFI

1 Answer

4 wheel drive goes on and off


you ever change the hub fluid?

Jul 17, 2017 | Polaris ATV

Not finding what you are looking for?
Polaris ATV Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaris ATVs Experts

john h

Level 3 Expert

12173 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Wade Mobley
Wade Mobley

Level 3 Expert

462 Answers

Are you a Polaris ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...