Question about Polaris ATV

Open Question

I have a 2001 polaris trailblazer 250. I'm getting no spark to plug. Is the ignition coil bad if so i do i verify a bad coil?

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to check ignition system on a 2004 ranger 400


Pull a plug wire or coil pack and see if you get spark when a spark tested is plugged into the boot and the engine cranked. Below is a picture of spark testing tool. About $5
spin_prod_214479801-myvoglraw4ckxjvzi5lij5yf-3-0.jpg

Feb 28, 2017 | Polaris ATV

1 Answer

I have a polaris 2008 trailblazer 330. It turns over but has no spark. What and where should i check 1st and next


start with a new spark plug,if no luck,try looking for an earth wire that maybe loose.if all wires look good,you may have a bad coil lead.that is the lead you put on the spark plug.try those things first

Oct 21, 2015 | ATVs

1 Answer

2002 Polaris trail boss 250 cc have good spark, put gas in spark plug hole ,will not fire


its electrical then, week coil or week battery, change plug could be week too,

Aug 14, 2015 | ATVs

1 Answer

What are some likely scenarios for a 2005 Mongoose 250 not starting


Bad pulsar unit
Bad CDI unit
Bad gearbox electrical unit
Bad coil
Bad HT lead or caps
Bad spark plug
Bad earth wires
Bad ignition key switch
Contaminated fuel
Dirty carburetor

May 25, 2015 | Kymco 2005 Mongoose 250

2 Answers

My 1999 Polaris 250 trailblazer has no spark please help


Probably the ECM, if you have a good, charged battery, spark plug, wiring is not damaged, and kill switches are in "run".

May 02, 2015 | Polaris ATV

1 Answer

Kawasaki troubleshooting


could be a bad spark plug,a bad ignition coil,a bad coil lead.Start with those first and also check your ground wires

Jul 16, 2014 | kawasaki 2008 Bayou 250

1 Answer

Where is ignition coil ?


ignition coil is connected to the spark plug

Jun 26, 2014 | Polaris ATV

1 Answer

Shut machine off then go to restart and it wont fire


if thats all the info you have you need to take it to the dealer.
those have way to many possible problems.
1. bad spark plug seal, dirt fills up the entire spark plug hole especially sand.
2. they have fuel pump pressure issues due to poorly constructed fuel pressure regulators.
3. fuel pump itself
4. if intake or exhaust is modified it may overheat after it shuts off (engines get much hotter after they are shut down) will not start if too hot
5. one of the three ignition coil might be failing
6. CDI may have failed
7. Spark plug might be hot fowled.

Mar 03, 2014 | Polaris 2013 Ranger 500 EFI

1 Answer

I have a 2003 polaris trailblazer 400. the oiler stopped working and fouled up my piston. I got it rebored and new piston. after that job was done i tried to start it. would not start. found that i had no...


fyi, something to watch out for on those is bad crank seals. will allow a lot of air in and cause the engine self destruct. before the cdi try simpler things like coil and making sure all the wiring is right. good pickup coil.

May 31, 2017 | Polaris ATV

Not finding what you are looking for?
Polaris ATV Logo

Related Topics:

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Polaris ATVs Experts

john h

Level 3 Expert

12650 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

297 Answers

Wade Mobley
Wade Mobley

Level 3 Expert

489 Answers

Are you a Polaris ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...