At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2003 Yamaha Big Bear 400 4x4. When I try to start it from the "Button" all I get is a "Buzzing" sound under the seat. I tried to jump start it and it does the same thing. It will start if I use the pull cord. Does this sound like just the battery or the relay switch?
There should be a small relay under rear left fender above or beside battery sometimes water gets in or I'd check cilinoid but I've had this problem on warrior and was starter relayThere should be a small relay under rear left fender above or beside battery sometimes water gets in or I'd check cilinoid but I've had this problem on warrior and was starter relay
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
...Have your batteries CCA checked...(Cold Cranking Amps) at a battery store, autozone, oreilly's, etc... THIS (CCA) is the true measure of your battery...amperage is what makes the starter turn..NOT voltage.. (amperage pushes voltage)...
Smack the starter with a hammer or a wrench if the starter isn't turning over then it's bad if it does crank and won't start your CDI may be bad you've all ready replaced the little stuff sounds like it your starter is bad hope it not CD I if it is replace the stator as well and buy them on ebay it will save you a ton of money
Got a 2001 400 big bear has good spark but won't fire off. I was told by a friend that it might have jumped time how would I go about timing this model
Sounds like the carb could use a cleaning and setting by a professional...install a new plug and a new air filter.. AFTER the professional carb cleaning and setting.,,do this and repost
×