Question about RTO Quads 125cc Full Size Adult 4 Wheelers ATV

1 Answer

Yahama blaster cut out at full speed, will not start

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 38 Answers

Very vague question but I will try anyway if it died at full throttle and won't start again check the copression if it is below 90 psi it needs the top end rebuilt also when u pull the spark plug out look at it if it is whitish and dry definitely needs to be rebuilt running to lean if compression is good carb or electrical problem hope this helps you

Posted on May 14, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yahama 2004 660 grizzle when i turn on the key all lights come on like normal but when i press the starter button i hear one click then all lights go off and does not start


There are a few directions to check but you need to be handy at tracing wires and checking connections and power points. The first thing after making sure the battery has a good charge would be to check for loose or corroded connections starting at the battery and working your way to the starter connection. A connection can have corrosion even if it looks tight and when a heavier load is applied it will fail. It sounds like there is a starter relay to cut power to the lights when starting. If you can find it and check it for power output there should be power going to the starter when it clicks. A direct wire from the battery to the starter will make sure that the starter I ok.

Nov 09, 2015 | ATVs

1 Answer

Kodiak wont start


Run a compression test (3-5 seconds) , with throttle closed, then repeat with throttle open. Should be around 100 psi closed and 125+ with it open. This will give you more direction.

Jul 09, 2014 | ATVs

1 Answer

Blaster stuck on full throttle


I would check the plastic heat isolator between the carb and cylinder head for leak.

Jul 07, 2013 | Yamaha 2004 Blaster Base

1 Answer

2006 yamaha blaster 250


is it getting spark? did you check the compression?

Jun 17, 2012 | RTO 200cc Full Size Four Wheeler ATV

1 Answer

2004 Blaster 2 stroke 200cc fires but well not kick start


check your compression. piston rings might be ate up and its time for a rebuild.

Mar 24, 2012 | RTO 200cc Full Size Four Wheeler ATV

2 Answers

1989 yamaha blaster does not stay on


mcdevito75 here, Sounds like a lack of spark to the spark plugs to me, have a shop check it out for you, menwhlie you can check all around your Yamaha blaster for any wires loose or not connected.

May 24, 2010 | RTO 200cc Full Size Four Wheeler ATV

Not finding what you are looking for?
RTO Quads 125cc Full Size Adult 4 Wheelers ATV Logo

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO ATVs Experts

fordexpert

Level 3 Expert

5537 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

relojmesa

Level 2 Expert

84 Answers

Are you a RTO ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...