Question about RTO 125cc Full Size Adult Quad ATV

Open Question

Need to replace rear boot on Can-am 500 outlander xt having trouble getting stub shaft out

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can I find instruction on how to replace rear prop shaft yoke and u joint on a 2012 Polaris ranger 500 side by side.

Rear Drive Shaft - YouTube

? 1:55
Dec 1, 2012 - Uploaded by Charles Humphrey
Is this excessive play in the rear drive shaft where it connects to the ... Published on Dec 1, 2012 ... It was the ...

Polaris Sportsman propshaft u-joint replacement - YouTube

? 22:29
Apr 30, 2013 - Uploaded by SeanBoburk Changing the propshaft U-joints on my 2006 Polaris Sportsman500 X2 ... Thanks yours tips help me ...

Oct 30, 2015 | Polaris 2012 Ranger 500 EFI

1 Answer

On a 2012 sportsman 850xp eps le with lower a arms that are for extra clearance do you need a axel that is longer to clear the a arm . Just spent $3800 having this done and the boot has already ripped open...

Hey Troy,
Sorry to hear about your trouble. It sounds like you increased the angle at the CV joint on your shafts. A longer shaft may not alleviate the problem. The big thing with a lift kit on your ATV is making sure the design of the kit is sound. And that it was installed properly.
Now it's quite possible you simply had a manufacture defective boot. And a new one is all you need. And that should be under warranty. I would certainly go back to the installer and show them the trouble you are having. With the lift kit, I feel you should have new shafts to meet the design requirements. Or your stock shafts may need to be modified. I hope all you really need is a better boot. And I hope this info gets you back to riding soon.

Take care.

Dec 14, 2014 | ATVs

1 Answer


you will need a special flywheel pulling tool be sure not to use a impact or a hammer when doing this it can damage the flywheel

Sep 01, 2014 | Can-Am Care 2010 Outlander 500 EFI XT

1 Answer

Outlander problems

do you have a good ground ???

Aug 28, 2014 | CanAm 2012 Commander 1000 XT

1 Answer

Dies when put in gear

If you didnt flush the fuel tank you probably have water in the carb again.

Aug 10, 2014 | CanAm 2007 Outlander MAX 400 H.O.XT

1 Answer

How do I install fox shocks on my outlander xt 500 2012

Are sure you have the correct shocks for your Outlander? You should not have to modify the shocks if you purchased a dirct fit part.

Jun 12, 2014 | ATVs

1 Answer

Gets up to 10 miles an hour then cuts out on me and won't go any faster.

Check / replace fuel filter. It sounds like it is starving for fuel. Also check the screen in the fuel tank.

Apr 08, 2014 | CanAm 2007 Outlander 500 H.O. EFI

1 Answer

Ticking noise, engine will not turn over

Connections for battery. Then look at the wiring to make sure ground isn't loose.

Apr 16, 2013 | CanAm 2012 Outlander MAX 800R XT

Not finding what you are looking for?
RTO 125cc Full Size Adult Quad ATV Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO ATVs Experts


Level 3 Expert

5687 Answers


Level 3 Expert

80608 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a RTO ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides