Question about ATVs

1 Answer

My yamaha grizzly 350 not starting their a noise comin from relay

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Master
  • 4,740 Answers

Posted on Dec 14, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I install a pull start kit?


google search Yamaha Grizzly Pull Start Kit instructions and choose images to get exploded view.
link is the install, should be the same as yours.
press the helpful button

Yamaha Big Bear 350 recoil start install

Jan 31, 2016 | Yamaha 2011 Grizzly 450 Auto 4x4

1 Answer

2010 Yamaha Grizzly 350 won't idle. will run but idle has to be left on


Sounds like your idle/slow speed carb circuit is plugged. A carb cleaning and spraying all passageways with aerosol carb cleaner should find your lost idle

Oct 29, 2015 | Yamaha 2010 Grizzly 350 Auto 4x4

1 Answer

How to know signs of a bad fuel pump in 2009 yamaha grizzly 350


Disconnect the fuel line at the fuel filter or carby, without starting the engine, turn the key to the on position. The pump should start , now watch to see if you have an even flow from the hose, if it looks like spluttering you may have a problem, also check the fuel filter.

Jul 30, 2014 | Yamaha 2007 Grizzly 350 Automatic

1 Answer

How do I open the seat on yamaha grizzly 350 Quad?


what year? pull cable under seat on some? (under plastic ) has looped cable , just pull it. along edge of seat on others small lever pull up towards seat.

Jul 13, 2014 | ATVs

1 Answer

ATV Yamaha Grizzly 350 2007 will not start


Sounds like it has sat for a while and your jets are gummed in the carb there is a you tube video on this topic that will walk you through the repair other thing to check turn fuel tank valve to off position remove fuel hose at carb slowly turn valve on to see if you have fuel to the carb if there is fuel there turn valve off install hose back on carb remove remove hose at tank valve now on the bottom of the carb you will see a plug or screw loosen this ( there may be fuel running out of drain hose have a bucket to catch fuel) now on the hose at tank valve blow threw it ( do not use air compressor) air should blow freely if it dose not your needle valve is stuck and there is no fuel getting to the carb or stuck float or a hole in the float and full of fuel

Dec 23, 2013 | Yamaha 2007 Grizzly 350 Auto 4x4

1 Answer

Backfires when you try to rev up engine,


check fuel flow and check spark at spark plugs

According to an "ATV Rider" 2009 article, "When the Grizzly was introduced in 1998 as a 600cc machine, the top was blown right off the displacement wars of the time."
It was replaced in 2002 with Yamaha Grizzly 660, an even bigger engine derived from the well-established all-terrain vehicle (ATV) Yamaha Raptor 660R.
Grizzly's 660 cubic centimeter (cc), four-stroke, liquid-cooled single overhead camshaft, five-valve engine performs well in open country, but sometimes it causes serious problems for owners.
Before you call a Grizzly dealer, however, trying a few tricks in your garage can save you a lot of time and money.

Check the fuel level.
Locate the fuel meter indicator on top of the multifunction display.
If it does not work properly, open the fuel tank, and push the Yamaha 660 Grizzly side to side.
Ensure the fuel is not contaminated by water or rust.
If you have not driven your Grizzly 660 for a long time, drain the tank completely, and fill it with a fuel tank cleaner.

Check fuel hoses for cracks or leakage.
The hoses should be soft and simple to bend.
Replace those that show any sign of wear.

Check the compression.
Screw a compression tester into the spark plug hole, and press the electric starter button.
If no compression exists, contact a Yamaha dealer.
Wipe wet or dirty electrodes with a dry cloth.
The spark plug gap should be checked regularly

Correct the spark plug gap.
Measure the gap with a wire thickness gauge.
If necessary, adjust it to 0.8mm using a screwdriver or replace the spark plug.
Use only a Yamaha-specified spark plug.

Check the Yamaha 660 Grizzly's battery.
Operate its electric starter.
If the Grizzly starts quickly, then its battery is in good condition.
If the engine turns slowly, check the battery lead connections, and you may need to change the battery.
If the engine still does not eventually start, your Grizzly is beyond home repair.


Jul 23, 2013 | Yamaha 2005 Grizzly 660 Auto 4x4

1 Answer

Yamaha grizzly 450


Time for a battery the same thing happened to mine about the same time

May 24, 2013 | Yamaha 2007 Grizzly 450 Auto 4x4

Not finding what you are looking for?
ATVs Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

11173 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

 Scott Tx
Scott Tx

Level 2 Expert

516 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...