Question about Yamaha 2005 Blaster Base

1 Answer

My 2005 Yamaha Blaster will crank and idle for 1/2 hour or a little more then it will just stalls try and restart it will not start it appears that after it cools down it will start up again

Posted by on

  • Henry Dixon
    Henry Dixon Apr 15, 2015

    2005 blaster 250 how will the engine perform without a air filter

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Yamaha Master
  • 991 Answers

Check that the breather in the fuel cap is still working. The breather has a hose with a one way valve.
You should be able to blow air in but not out. I hope that you are moving during that 1/2 hour as these motors require air flow for cooling.

Posted on Apr 14, 2015

  • Henry Dixon
    Henry Dixon Apr 14, 2015

    Thanks Terry for your reply. I will check the breather in the cap, no I was not riding when the engine was @ Idle

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Idles fine,,push pedal and it dies


Idles FINE but stalls when pedal is pressed - Yamaha Rhino Forum ...

www.rhinoforums.net > ... > Technical > Engine
Feb 6, 2012 - 9 posts - ‎5 authors it starts fine but stalls when I press the gas pedal. what do I need to check now. Sponsored Links. RhinoForums.net is the premier Yamaha Rhino UTV/ATV Forum on the internet. Registered ... Does it seem to Idle smoothly and does it start right back up after it dies? Does it .... astro push accelerator and dies.

Oct 07, 2015 | ATVs

1 Answer

Howdy.I have a 2005 yamaha blaster.Low hours,good spark and freesh fuel.Fired it up the other day and was fine for about 5 min.Then it seemed to loose power then died.I checked fo fuel and spark , bot


the crankcase is filled with fuel from a leaking carburetor float (would be LOTSSSSS of smoke) OR Bad crankcase seal and its sucking in air, bad reed cage area seal, exhaust plugged up!

May 05, 2014 | Yamaha 2005 Blaster Base

1 Answer

I have a 2012 yamaha 300 grizzly and it will noy charge, I have replaced the battery with a new one and it just drains the battery and it will quit after running for about a hour.Is there a way to check...


Yes, Get a GOOD multimeter. Set it to any DC voltage over 12 volts. (2 people makes this a lot easier!) Crank the engine and put the leads red-red (positive to positive) and then black-black.(negative to negative) on the battery. There should be around 12.4v - 12.5v on idle, when you rev the engine to about 4K rpm+ you should see around 13.5 volts. If not seeing more that 12.8v over 4k rpm you need to find a factory service manual to troubleshoot the problem. Until you see 13.5 or a little higher you will never have it "fixed".

Jan 16, 2014 | Yamaha 2012 Grizzly 300 Automatic

1 Answer

2001 yamaha 350 warrior that will start and idle but when you give it the gas it stalls.i've taken the carb off and cleaned it changed the plug. removed the wire from the emergency break lever. and it...


If you have good spark then it's most likely a fuel issue, anything off of idle is dealing with the main jet and metering needle, clean jet and check needle for excessive wear.

Oct 20, 2013 | Yamaha ATVs

3 Answers

My son was riding his 2004 blaster was having a blast but ran it for about 4 hours. When he went to ride it home ess than 5 blocks away it stalled and the kick start seized and won't puch down. In addition...


Sounds like you need a rebuild. Dont use cheap china parts, go online to http://www.amazon.com/Wiseco-PK1089-2-Stroke-Piston-Top-End/dp/B0050FYN4Y/ref=sr_1_sc_2?ie=UTF8&qid=1420937950&sr=8-2-spell&keywords=yamaha+blaster+wise+co And get this. This should be everything you need to rebuild it. Now you need to MIX your oil. Not use the tank. Google blaster oil tank bypass and just remove the tank as it can tear up the engine badly. The oil pump can send shards of plastic into the crank and cause it to fail. Once you have done this, You can have the engine built, mix the oil 32:1 and insert into the gas tank. After this is all complete it should all be running even smoother then before. For any other help go to www.Blasterforum.com

Aug 08, 2013 | Yamaha 2004 Blaster Base

2 Answers

1989 yamaha blaster does not stay on


mcdevito75 here, Sounds like a lack of spark to the spark plugs to me, have a shop check it out for you, menwhlie you can check all around your Yamaha blaster for any wires loose or not connected.

May 24, 2010 | RTO 200cc Full Size Four Wheeler ATV

Not finding what you are looking for?
Yamaha 2005 Blaster Base Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

528 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...