Question about Yamaha 2005 Big Bear 400 4x4

Open Question

Wont start with keyswitch.replaced the solenoid and still nothing.when u push the start button the neutral lightdims.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Suzuki eiger starter button doesn't do anything


Hey Brad
With the info you have provided, it seems to point to the ignition switch as the problem. (the clicking you should hear comes from the solenoid contacts - not the starter button). There is probably one wire in the switch that has broken or come unsoldered or other wise not making the right connection.

Jun 12, 2017 | Suzuki 2004 Eiger 400 4X4 Manual

2 Answers

Hit the start button and nothing happens 2008 750 brute force


Check your starter solenoid. You can trace it by following the power wire from the battery to the small solenoid block that contains a 30 amp fuse. You can bridge the posts on the solenoid by using needle nose pliers or whatever else you may have. If it starts up or you hear the starter run, you have a bad starter solenoid.

Feb 02, 2016 | kawasaki 2008 Brute Force 750 NRA OUTDOORS

1 Answer

I got a sportsman Polaris 500 its a 97 ok I got a solenoid and it a universal atv/utv I got fire everywhere except my starter coming from solenoid


Make sure you have at least 12.5v at the battery. Then make sure you are getting the same voltage at the solenoid. You should at least hear a click. If you are getting voltage at the solenoid put your test leads so that you can test for voltage on the wire going to the starter. Make sure your other lead is grounded at the batt. Turn key in, in neutral as if you are going to start and push the start button. You should get a voltage reading. If nothing it is your starter solenoid/relay or button. If you do get voltage time to pull that starter!

Aug 01, 2015 | ATVs

1 Answer

Have bayou 250 wont jump start neutral light does not come on even when attempting to jump start. will pull start


May just need a battery if not maybe the solenoid sometimes you can peck on the solenoid and it might start or a fuse

Oct 08, 2014 | kawasaki 2005 Bayou 250

2 Answers

2006 yamaha bruin will not start by push button. Battery is fine, all lights come on but when button is pushed nothing happens


Hi. Depending on your skill level the starting point would be check "ALL" the fuses with a test light/multimeter. Next point would probably be check the starter itself, Again with a test light or multimeter you should have the main positive to the starter - make sure you have good battery voltage and check this whilst attempting to crank. Then the crank feed itself which is the small wire to the starter solenoid, Again check for good voltage whilst attempting to crank. If there is voltage on both then make sure the starter has a good earth by using the starter motor body as the earth whilst testing the main feed at the starter. If you have good main feed and crank the starter has failed. If not you need to post your test results for further help, Jon

Dec 09, 2013 | Yamaha 2006 Bruin 350 Auto 4x4

1 Answer

Have a 2006 honda rubucun 4 wheeler cant get it to crank


does the neutral light come on? checked the fuse? it wont crank if its not in neutral and the kill switch is on. if thats all ok, test the solenoid.

Mar 13, 2013 | ATVs

Not finding what you are looking for?
Yamaha 2005 Big Bear 400 4x4 Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

552 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...