Question about ATVs
Considering the year model it could easily be a faulty connection from loose or contaminated wiring.,relays.,Alternator..Save time and check rectifier/regulator before wiring nightmare...Start and run engine sitting still at 2000 rpm.for 1 minute..,Shut it off.Carefully touch regulator ...If it is Extremely hot it is your problem.If not take it to mechanic..I would save time and troubleshooting nightmares because wiring will drive you crazy If you know nothing about it..Take to a Motorcycle Tech and let him repair it correctly ...Then he will explain the problem
Posted on Apr 05, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Well first have you charged your battery back up, if so then try to by pass the ingintion switch by just connecting the two main post of the colenoid with a piece or wire, this creates a direct wire basically from your battery to your starter, if still no luck you will need a new starter located more to the drivers side close to right under the pedels on the bottom side of the truck.
Posted on Oct 06, 2008
SOURCE: H2 Hummer
Today 11-12-08 my 2003 H2 Hummer would not start. Checked battery it ischarged. Cables tight. Tried to start with portable booster pak. No go. Tridto jump start with my wife's Suburban. Still no go.
When I turn the switch I hear a single click and that is it. No engine turning over. While trying to start with key the headlights go out. Out of ideas, Will take to Chevy garage in am. Will post solution.
Posted on Nov 13, 2008
SOURCE: wont start
There's only 2 more things that I can think of, check the fuse for the ignition, then the computor itself, you did everything else.It might be the problem and may not.
Posted on Jan 28, 2009
Well, not necessarily need a professional if you have some basic maintenance experience.
If you look at the engine compartment from the front of the car, the switch is located at right side, very close to the radiator, close to the bottom of the car. You will see the shifting cable as well as an electronic connector on it. You can try if you shift, the cable will rotate the arm on the switch.
According to my experience, it's not easy for the switch to go bad, it may just need some alignment so the switch angle is zeroed in wrt the contact points. There is a line on the switch for alignment purpose.
To replace it is not difficult at all, once you located it, you will see. You can get a used one at junk yard, I believe it will be much much cheaper.
Posted on Nov 21, 2009
Tips for a great answer:
Jun 12, 2017 | Suzuki 2004 Eiger 400 4X4 Manual
Dec 28, 2016 | ATVs
Apr 05, 2016 | ATVs
Jan 06, 2016 | Yamaha 2007 Grizzly 450 Auto 4x4
Dec 27, 2015 | ATVs
Oct 05, 2014 | ATVs
Jun 02, 2014 | ATVs
Feb 12, 2014 | ATVs
Aug 16, 2017 | Yamaha 2004 Kodiak 400 Auto 4x4
Dec 18, 2017 | Polaris ATV
347 people viewed this question
Usually answered in minutes!