Question about ATVs

1 Answer

Carburetor screws won't come out. How do I get the out.

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 991 Answers

If you are talking about the float bowl screws. Use a fine hacksaw and cut straight across the screw head, then you can use a flat blade screwdriver to remove after soaking with penetrating oil.
If you are talking about the idle or air mixture screws these sometimes have o rings and need a little air pressure to get them out.

Posted on Mar 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need initial screw settings for a YFM80 Moto 4 carburetor. I just rebuilt it but can't find initial screw settings.


Hey William,
By rebuilt, do you mean the carburetor?? ..or the engine??.. if you rebuilt the carb and you did not remove these screws ( and count the revolutions out from lightly seated), then you did not do the rebuild the carb correctly.. sorry.. What, exactly did you do to the carburetor?? Please reply on here to me..with details!!
thanks..

I cannot understand why someone that claims to have "rebuilt" a carburetor actually missed the BASCIS of carb rebuilding 090.. the air screw (the one on the angle toward the back of the carb has/is connected to the pilot jet system and the idle system, the passages that use this system must be perfectly clean for the engine to run properly.... the air screw has a spring. a spring seat and a o-ring for sealing on it.. the screw setting starts at 1 & 1/2 turns out from lightly seated.. then set the screw in the very side of the carburetor (its the one that controls the idle speed).. once you get the machine warmed up and cleaned out.. let it idle, turn the air screw in and out SLOWLY about a 1/4 turn at a time..EACH TIME ..waiting until the idle settles and then until you reach the point the machine idles as high as possible, then turn in it 1/8 of a turn.. then set the idle speed with the "side screw" to a speed you like... good luck...thanks!!

Jul 17, 2017 | ATVs

1 Answer

Where is the mixture screw on the carburetor for a 2005 honda trx500tm


Hey Jason,
First,,WHY do you need to know where the screw is??? Why are you going to adjust it... it only controls the " idle to 1/8 throttle" part of your running engine... Is your engine is starting to run rough?? Please reply to me on here..I'll help you..

Jun 30, 2017 | ATVs

1 Answer

What is the best way to winterize mule stored in a garage


There's a drain screw on the bowl of the carburetor - either run the gas out - or turn the valve to off and drain the gas in the carburetor. I also take the spark plug out and spray on top of the cylinder and all around - anything metal. GETSOME is a product out of Florida that actually works. Disconnect the battery and hook the battery up to a 2amp tender/not charger - you'll need the battery tender that keeps the voltage correct but doesn't over charge - reverse when the seasons change and you should be good to go -

Nov 16, 2015 | kawasaki 2008 Mule 3010 4x4

1 Answer

How can I adjust idle system?


ATV Carburetor Idle Adjustment Fix - YouTube

? 1:27
www.youtube.com/watch?v=Xlagflm4ka0
Oct 28, 2012 - Uploaded by StopDropNRun
GIO Rebel t3 200cc Quad ATV Carburetor Idle Adjustment Fix Iadjust the carb idle screw ... Do you have another channel called pwns Jones?

Oct 27, 2015 | ATVs

1 Answer

Pilot air screw adjustment 03 raptor


Start at 1.5 turns out from fully closed.

May 28, 2014 | ATVs

1 Answer

06 king quad spark fails while riding


you are fouling spark plugs. the atv is running way too rich. either the air filter is super dirty or exhaust has been modified (race pipe, baffle removed, etc)

if none of those have been done then maybe your carburetor needle is stuck open and is flooding the motor and the carb needs cleaned.

Mar 31, 2014 | ATVs

1 Answer

Clean out a yamaha big bear carburetor


remove screw or large hex head plug in bottom of carb..drain and replace screw or plug.. . A K&N must be clean, lightly "oiled",, and dry..

Mar 18, 2014 | K and N Yamaha Big Bear Yfm350fw Air...

Not finding what you are looking for?
ATVs Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top ATVs Experts

john h

Level 3 Expert

12104 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

 Scott Tx
Scott Tx

Level 2 Expert

520 Answers

Are you an ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...