Question about Bobcat 2010 3400 4x4

1 Answer

Why is getting hot after changing water pump - Bobcat 2010 3400 4x4

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 213 Answers

If you did a clean perfectly clean installation when installing the water pump,there should be no issues with air infiltration. If you are good , OK.

The most common problem over the years that can become an oversight for those around me is how clean the radiators core on the outside are..

Withstanding a change of the fluids and the filters when the pump went together.

Since this is a hydrostatic transmission. The other place that comes to mind is the transmission cooler that is in the loop area. What do say?

Well, a generous soaking of GUNK and or equivalent followed by a extensive pressure wash could make you very happy. Any way you will probably want it running when doing the total wash. We do.

It always made us smile. Here is to a happy chin, soon, too. Take a look. Fare well.

Posted on May 16, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a polaris 400 sportsman 4x4 liquid when I started it and ran it around the hot light came on but the radiator was full of water and still cold. any suggestions?

Water pump, (if it has a thermostat..remove it)...check your oil to see if there has been any water in will look like lightly creamed coffee...then water pump seal is bad..
Check the water pump impeller..check the fins...see if it will spin without the engine running...(it should NOT!)..

Aug 25, 2017 | ATVs

1 Answer

2016 cf moto 800 zforce800ex. Overheating, I cleaned the radiator, many times, flushed it out. Still overheating brand new machine and I can't enjoy my rides.

Does it have a thermostat?? ..Remove it.. ( I don't see one in the cooling system breakdown...??)

Is the cooling fan working?? ....
......... next check the water pump to make sure it working..(pumping water/coolant)

get a buddy to help you...

see pic... You should NOT be able to spin #8 with your hand.. this is the impeller.. it what pumps water through the system...see if it will pump water.. remove the hose with it running.. use a water hose to keep the system filled.. put your hand over the outlet and see if you can stop it from pumping... if you CAN.. you have found your problem. It should push water...period.. (When you remove the cover to check it,, look for signs of wear or broken vanes..

Aug 01, 2017 | ATVs

1 Answer

2004 Polaris 500 ATV. Changed water pump Now it leaks out weep hole. Any answers

The new pump shaft seal is no good. Get another pump.

Jan 03, 2017 | Polaris ATV

1 Answer

2012 800xp when engine is hot then engine loads up at slow speed ,,,give it gas and it clears up..plugs changed check engine light comes on and off ,plugs changed what can i do to correct this problem

Check all Sensors like airflow sensor Water sensor ,oil sensor . when the warning light comes on it sends half load power to the cdi

Apr 24, 2016 | ATVs

2 Answers

Peugeot 307 engine temperature - ECU fault

Is the fan turning on? When you say new switch, are you referring to the fan relay? Check fan fuse(s).

Jun 12, 2014 | ATVs

1 Answer

Why dont my water pump work on my 2005 polaris 500

Change it out with a new pump

Mar 20, 2014 | ATVs

Not finding what you are looking for?
Bobcat 2010 3400 4x4 Logo

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bobcat ATVs Experts

john h

Level 3 Expert

13651 Answers


Level 3 Expert

78971 Answers

 Scott Tx
Scott Tx

Level 2 Expert

579 Answers

Are you a Bobcat ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides