Question about CanAm DS 70 ATVs

Open Question

Turn key on no power no lights new barrery will start jumping across solenoid

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mule 550, It starts fine, but will not shut off when the key is turned off....any suggestions?


Hey Matt, sounds like the switch is going bad.. I would see if it will start - WITH THE KEY OFF by "jumping" the solenoid.. if the switch is bad.. it might start... and confirm the switch is bad..

Jun 21, 2017 | kawasaki 2008 Mule 3010 4x4

1 Answer

2000 Honda atv,300 four trac ,no neutral light and start stwich,bike in neautral,but nothing


Hey Ronald,
Wit the info you have provided, it might be the ignition switch..- not letting the engine start while jumping the solenoid.. no neutral light.all fuses good,,etc...
Take the switch off and take it to the dealer and have them check it electrically...

May 27, 2017 | ATVs

1 Answer

My 05 Honda rincon won't start at the button, I replaced the selenoid starter and new battery press the start button and nothing happens.


1. Make sure you have all the switches in the right place (kill switch..etc..)
1. With the key off - Take a screwdriver and jump the two big threaded connectors on the solenoid - the engine should turn over... if it doesn't - either the solenoid is bad -or you have no connections to the battery and/or starter. If it turns over, now turn the key on and see if it starts.. it should.
If this works.. the problem is probably the starter button.

If not...double check ALL the connections to the battery/solenoid/starter... you have probably left a wire off somewhere..( we have all done it!!)..make sure the right wires are in the right place...

Feb 26, 2017 | Honda 2005 FourTrax Rincon GPScape

1 Answer

Nothing when turn key. Bought new battery and fully charged, installed, still nothing.


Hello,
The "ticking" you hear is probably the solenoid trying to "connect"
The solenoid is the round thing that is the first thing the large red cable from the battery runs to. There are more wires connected to the solenoid..the TWO big ones carry the power from the battery and then jump it to the BIG cable that goes directly to the starter. You can CAREFULLY "jump" the two big connectors ON the solenoid with a screwdriver ( CAREFUL - SPARKS WILL FLY!). If the motor turns over you have a bad solenoid. Key does not have to be on, you just want the motor to turn over. NO open fuel sources!! SPARKS WILL FLY WHEN YOU JUMP.
Try this and repost, let me know.

Mar 10, 2016 | Polaris 2006 Sportsman 500 HO EFI

1 Answer

1999 Polaris sportsman 500 electric start & headlights or fan will work,


If you check the wires on the battery, the solenoid, and and your ground cable - one loose main and you're dead in the water - after that - you'll need to confirm that you're getting power to one side of the solenoid and when the key is turned to the other post. - also - you need to check your kill switch that it didn't dive in the off position. If you can confirm that all the wires are tight and you're getting power across the solenoid I can lead you from there if need be

Nov 20, 2015 | ATVs

1 Answer

My electric start had stopped working. And every time I went to try and start it make a clicking noise. Now I have changed the starter solenoid and the new part makes a buzzing noise.


Sounds like a dead battery , try jumping the starter w a screw driver if it's new it will turn over at least , dead batt or starter solenoid is most likely cause, if your shure your batt is good? Try sanding connections

Nov 10, 2015 | Honda 2013 FourTrax Rancher 4X4 With Power...

1 Answer

Will not turn over. replaced solenoid and battery is new. Lights, and power OK. Too weak to pull cord to manually start.


You need to try and find someone to try the manual start, just to rule out anything past the auto switch such as starter. If battery is new and solenoid is new then it's probably either the switch or could even be a fuse in the link.

Sep 02, 2015 | Arctic Cat 2007 400 4x4

1 Answer

Won't crank


if battery is good, check to see if you have voltage at solenoid. if you do, turn key to start, that should throw the fire from other side of solenoid to starter. if there is no fire on the other side of solenoid when you turn the key,then your solenoid is most likely bad.

Jan 05, 2014 | John Deere 2007 Gator XUV 4x4 620i

3 Answers

2004 arctic cat 500 4x4 starter turns doesnt engage starts with pull cord


The starter has to throw it's gear out using centrifugal force. The speed of the starter has to be enough to overcome the spring inside. It is either a little seized and needs to be rebuilt and greased up, or the battery isn't powered up enough to get the right speed to engage properly. In that case clean the battery posts and clamps well, then charge or replace the battery. To know if the battery is bad wait till it is charged... if it still doesn't engage try again with booster cables from your car etc. and see if it suddenly works fine.

Nov 08, 2013 | Arctic Cat 2004 500 4x4 Automatic TRV

1 Answer

Doesn't start ...just stopped running.the start button won't turn it over but still drawing power(dims neutral light).i tried turning it over by shorting across the solenoid quad turns over but won't...


is it carbureted? if so try a deep cleaning,now on the start button issue it sounds like you need a new starter soleniod are there is a short somewhere. find a wiring digram and start trouble shooting at the solenoid.

Sep 17, 2013 | Arctic Cat 2006 250 DVX

Not finding what you are looking for?
ATVs Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top CanAm ATVs Experts

john h

Level 3 Expert

11064 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

 Scott Tx
Scott Tx

Level 2 Expert

516 Answers

Are you a CanAm ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...