ATV speedometer won't work for suzuki kingquad 450 2007 model

The speedometer on a 2013 Suzuki KingQuad 400 ASi is connected to the speed sensor, which is mounted on the transmission. The speed sensor generates an electrical signal that is sent to the vehicle's Engine Control Module (ECM). The ECM then uses the signal to calculate the speed and sends it to the speedometer for display on the instrument cluster.
If the speedometer is not functioning, there may be an issue with the speed sensor or the wiring between the speed sensor and the speedometer.

Question edited for full make and model.
Question moved from Computers.

You must be Australian. You spell 'solenoid' like Australians speak it. :>D

You have a dead short to earth. Incorrectly wired. Start checking with a multimeter set to Ohms.

https://www.google.com/search?q=2006+Suzuki+KingQuad+700+replace+solenoid

you are not alone!

https://www.google.com/search?q=2006+suzuki+kingquad+700+blows+fuse

..

Ok...
Follow these links:
Suzuki atv manuals
BEST BRANDS REPAIR MANUALS

Suzuki atv manuals

Suzuki Motorcycle Manuals Repair Manuals Online

Cable to the transmission could be broken what yr mk and model?

I’m happy to help further over the phone at https://www.6ya.com/expert/david_66a56a0239b6ab32

Check to see if you have significant voltage to solenoid and check that you have a solid frame ground. Hope this helps.

Look at your Magneto Flywheel , sounds it jammed .

http://www.scribd.com/doc/93891348/Polaris-Atv-Service-Manual-Repair-1985-1995-All-Models#scribd

I'd guess bad wiring from the regulator. mine regulator burned up and I had to run a new wire from it to the battery.

did you figure out the problem because mine just did the same thing.