Question about RTO 200cc Full Size Four Wheeler ATV

1 Answer

Not starting with electric starter, battery is new, and replaced relay. starter does nothing. neutral light does come on.

Starter does nothing, battery is new and I replaced the starter relay. the neutral light does come on, relay clicks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

Did you try pushing in brake are clutch? and have you checked to make sure fuses are not blown.

Posted on Mar 30, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Honda atv,300 four trac ,no neutral light and start stwich,bike in neautral,but nothing


Hey Ronald,
Wit the info you have provided, it might be the ignition switch..- not letting the engine start while jumping the solenoid.. no neutral light.all fuses good,,etc...
Take the switch off and take it to the dealer and have them check it electrically...

May 27, 2017 | ATVs

1 Answer

Yamaha Grizzly 03-660. Why doesn't it start?


If you look at the picture - 29, 30 & 31 are the starter relay, main fuse and probably the bolt that holds it to the frame. When that fuse blows or that relay goes out - it's over. Not going to start. If you have a standard test light - attach the clip end to ground (frame of atv) and then put touch the postivie post of the battery to verify that the light is functional. It will light up if the battery is good. Next -follow the red cable to the starter relay in the diagram. Where it attaches - check for power. With the key off. IT should be live without the key in. It's on standby in a way. If you do not have power at the other end of your positive cable - your cable is shot. If you do - then you will have someone turn the key and check to see if power is coming from the other post off the relay (that would go to the starter and make it engage - if the square standard fuse in that relay is not blown - but power is not coming through when you touch the key - it's probably the relay. Your safety switch among other things can prevent the engine from starting as well - along with loose cables and grounds (always do a thorough check of all wire connections and grounds - one loose ground can mean a nightmare sometimes) - if you give that a try and do not identify the culprit - just comment or reach out and I'll take you through the next steps. All The Best, Justin Lee, 17 South Industries, LLC
jump-start-m-ve-03-660-grizz-replaced-4n3y21cmsqpgtsjshk50qfrx-3-0.png

Here's a copy with 29, 30 & 31 Link will take you to page as well*


2003 Yamaha GRIZZLY 660 YFM660FR Parts
jump-start-m-ve-03-660-grizz-replaced-4n3y21cmsqpgtsjshk50qfrx-3-2.png

Your starter relay -

jump-start-m-ve-03-660-grizz-replaced-4n3y21cmsqpgtsjshk50qfrx-3-5.png
4SV 81940 12 00

Apr 22, 2016 | ATVs

1 Answer

After replacing battery,extra installed lights come on,but turn of ignition switch ,nothing.


You may have blown the main fuse for the starter relay. Easy to do. If you follow the red positive battery cable to the starter relay (most models) you'll find the starter relay at the other end. There should be a fuse in the relay or in a panel on the atv. Same type square standard sized boxed fuses car use. Best place to start. If you comment or answer with your year, make, model and engine size I can provide a better answer.

All The Best, Justin McCartney
17 South Industries, LLC

**FYI - that's a pretty standard starter relay. That's for a Yamaha Bear Tracker - two fuses - one is the main and the other is a spare that you can pull out and use. When the fuse blows no power. - With your lights - they will still work if attached directly to battery. Relay won't if fuse is blown.

after-replacing-battery-extra-installed-4n3y21cmsqpgtsjshk50qfrx-3-0.png

29, 30 & 31 are the starter relay for the model this diagram goes to. Usually the relay is going to be close to the battery, by the way.

after-replacing-battery-extra-installed-4n3y21cmsqpgtsjshk50qfrx-3-5.png

Apr 05, 2016 | ATVs

2 Answers

Why is it I turn key on no power to dash or starter?


The ignition switch has problems. Its complex w alot of wires. A relay or fuse cud b factor tu

Jan 06, 2016 | Yamaha 2007 Grizzly 450 Auto 4x4

1 Answer

The is no power to the ignition dash lights head lights, winch but will pull start


First check the positive cable at battery and at the starter relay that the positive wire usually goes to. Somewhere right around there should be a fuse - that fuse goes out and your ignition system is kaput - pull start or nothing. If nothing at all happens - more than likely your fuse or what...yamaha had them on a lot of the 90s - 00s bikes - it was called a starter cut-off relay - it was a small black box wired in right by the postive cable where it goes to starter relay. Also check your ground cable at battery and where it goes to engine, usually. if all that checks out - let me know your year, make & model and if I have the tech info I can tell you where to start and how to troubleshoot - all the best

Dec 27, 2015 | ATVs

1 Answer

I got a sportsman Polaris 500 its a 97 ok I got a solenoid and it a universal atv/utv I got fire everywhere except my starter coming from solenoid


Make sure you have at least 12.5v at the battery. Then make sure you are getting the same voltage at the solenoid. You should at least hear a click. If you are getting voltage at the solenoid put your test leads so that you can test for voltage on the wire going to the starter. Make sure your other lead is grounded at the batt. Turn key in, in neutral as if you are going to start and push the start button. You should get a voltage reading. If nothing it is your starter solenoid/relay or button. If you do get voltage time to pull that starter!

Aug 01, 2015 | ATVs

1 Answer

ELECTRICAL STARTING PROBLEM


Make sure kill switch is on, put in neutral, press brake, it then should start. If is doesn't check battery, it battery is good check starter solenoid, then starter.

Mar 21, 2015 | ATVs

3 Answers

Got a 125cc Taotao atv for the kids.put new battery in new chain ,fuses all good checked all wires .no probs .cant figure why it wont even try and to start.no sound or cranking .as it is electric star


Your starter is probably out, or not properly connected. Locate the starter and there should be two wires going to it, they both should be marked with + and - make sure red goes to positive and black to -
If you want to test your starter before buying a new one, take it off of the fourwheeler, and hook it up to the battery. (note: this is not recommended by the manufacturer may void warranty. If you do do it.... Hold on to that starter.)

Feb 17, 2015 | ATVs

1 Answer

When i turn key gauge pod lights up but nothing else happens


neutral try connect battery terminals charge battery,starter hanging up

Aug 28, 2014 | Polaris 2006 Sportsman 500 HO EFI

2 Answers

No panel lights


the solenoid for the ignition and starter has failed. Also remember the brake has to be applied to activate the starter system.

Mar 29, 2014 | John Deere Trail Buck 650 EXT ATVs

Not finding what you are looking for?
RTO 200cc Full Size Four Wheeler ATV Logo

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top RTO ATVs Experts

fordexpert

Level 3 Expert

5474 Answers

yadayada
yadayada

Level 3 Expert

75108 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Are you a RTO ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...