Fuses on honda atv trx 400fw alternator

Question edited for clarity.
Question moved to model category.

Here is the engine.

https://www.google.com/search?q=honda+trx+250+engine+for+sale

Bayou wiring harness

https://www.google.com/search?q=Kawasaki+Bayou+300+wiring+harness+replacement

..

I am not exactly familiar with this particular atv.. start with removing the gas tank, this should allow you to see where the fan is connected and bolted to. It should be a pretty straight forward operation.

Hey Scoot, I need a little more info,, if you have removed the battery cables, you may have hooked something up wrong..Did you replace the battery?? ; hopefully with an exact match of the old one.. double check you connections and reply to me.

There is no vr on the trx90. They have an alternator. Please see pic

Repeat the process with a manual. Sounds like shaft not engaged.

A professional shop will charge from $85 to $110 per hour..depending on location...ask how they determine the charges... ALL manufacturers have a flat rate manual that SHOULD determine how many hours to will take...( When I was working in a shop.. I was usually about 1/2 hour behind on full overhauls..and could usually beat the flat rate on electrical issues)..
Should be able to get out for about 4 - 5 hours..depends on if they have to remove the engine first...engine removal/reinstall is about another hour.

low voltage problem. Check battery and charging system.

Set motor to TDC compression stroke. Watch intake valve open and close.. when it closes continue to turn to timing mark.

if you are in the uk then cotact honda uk

Hi,

Have you checked the magneto and the valves for the right gap size?