Question about Yamaha 2013 Grizzly 300 Automatic

1 Answer

300 grizzly yamaha 2wd. Was running fine. just died. Will turn over great, but will not start. It will not even try to start

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Yamaha Master
  • 2,503 Answers

Have you tried replacing the spark plug?...Put a new one in it anyway - you ELIMINATE a problem very inexpensively!



Do you have gas in it?



Is there gas in the float bowl? There is a screw or bolt in the very bottom of the carb float bowl, loosen it and gas should flow out freely. If not. there is the first problem I would get repaired.

Keep me posted and if this doe not fix it, we'll try other options.

Posted on Mar 10, 2016

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 Yamaha Grizzly 600 runs for 5mins. and dies. Engine won't turn over for short period and then starts. This cycle continues.


fuel flow to the carb is slow. fills the bowl, runs till its dry. pause while it refills slowly, repeat.

Feb 21, 2017 | ATVs

1 Answer

Engine dies as soon as I put in reverse and will not start in reverse.


Grizzly 125 stalls in reverse - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & Transmission
Oct 18, 2013 - 13 posts My dad just bought a 125 and it stalls the instant u pit it in reverse. ... electrical sensor that will kill the engine if the brake isnt depressed when u go into reverse. so now i need to ..... yamaha grizzly 125 dies when put in reverse.

Sep 29, 2015 | ATVs

1 Answer

How to know signs of a bad fuel pump in 2009 yamaha grizzly 350


Disconnect the fuel line at the fuel filter or carby, without starting the engine, turn the key to the on position. The pump should start , now watch to see if you have an even flow from the hose, if it looks like spluttering you may have a problem, also check the fuel filter.

Jul 30, 2014 | Yamaha 2007 Grizzly 350 Automatic

1 Answer

Backfires when you try to rev up engine,


check fuel flow and check spark at spark plugs

According to an "ATV Rider" 2009 article, "When the Grizzly was introduced in 1998 as a 600cc machine, the top was blown right off the displacement wars of the time."
It was replaced in 2002 with Yamaha Grizzly 660, an even bigger engine derived from the well-established all-terrain vehicle (ATV) Yamaha Raptor 660R.
Grizzly's 660 cubic centimeter (cc), four-stroke, liquid-cooled single overhead camshaft, five-valve engine performs well in open country, but sometimes it causes serious problems for owners.
Before you call a Grizzly dealer, however, trying a few tricks in your garage can save you a lot of time and money.

Check the fuel level.
Locate the fuel meter indicator on top of the multifunction display.
If it does not work properly, open the fuel tank, and push the Yamaha 660 Grizzly side to side.
Ensure the fuel is not contaminated by water or rust.
If you have not driven your Grizzly 660 for a long time, drain the tank completely, and fill it with a fuel tank cleaner.

Check fuel hoses for cracks or leakage.
The hoses should be soft and simple to bend.
Replace those that show any sign of wear.

Check the compression.
Screw a compression tester into the spark plug hole, and press the electric starter button.
If no compression exists, contact a Yamaha dealer.
Wipe wet or dirty electrodes with a dry cloth.
The spark plug gap should be checked regularly

Correct the spark plug gap.
Measure the gap with a wire thickness gauge.
If necessary, adjust it to 0.8mm using a screwdriver or replace the spark plug.
Use only a Yamaha-specified spark plug.

Check the Yamaha 660 Grizzly's battery.
Operate its electric starter.
If the Grizzly starts quickly, then its battery is in good condition.
If the engine turns slowly, check the battery lead connections, and you may need to change the battery.
If the engine still does not eventually start, your Grizzly is beyond home repair.


Jul 23, 2013 | Yamaha 2005 Grizzly 660 Auto 4x4

Not finding what you are looking for?
Yamaha 2013 Grizzly 300 Automatic Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

 Scott Tx
Scott Tx

Level 2 Expert

516 Answers

Noel Bennett

Level 1 Expert

24 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...