Question about Yamaha 2004 Kodiak 450 Auto 4x4

Open Question

Revere ligh blinkin on 05 yamaha kodak - Yamaha 2004 Kodiak 450 Auto 4x4

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 rhino 700 stays in low range even when shifter is in high revers light stays on and speedometer inop


Check the gear change lever where it joins onto the side of the engine/gear box. Could have slipped off or stripped the splined shaft. If that is fine and when you move the hi/lo range, and the shaft on the gearbox moves its possible the gear change mechanical levers have broken on the inside of the box.

Jan 14, 2014 | Yamaha 2008 Rhino 700 FI Auto 4x4 Sport...

1 Answer

I put a 102mm piston on it with 11:1 compression and now when you try to start its hard to turn over. Ive put a new starter bigger battery and checked all wiring connections but nothing has helped....


STOP TRYING TO START THIS ATV!!!

..Sounds like the valves are hitting the piston!!

Did you/your mechanic check the valve to piston clearance at max valve lift/PISTON HEIGHT??..you need at least .035" (.89mm) on the intake and .060" (1.5mm) on the exhaust.- MINIMUM - . THIS IS CRITICAL!!!

.
.....
11:1 is a pretty tall compression ratio. Are you racing this atv?.. one thing you will find out is that you NEED TO RUN HI-OCTANE fuel..NOT airplane fuel either (its got antifreeze and other additives you so not want to deal with)..11:1 might require a 110 OCTANE race gas to get it to run right... make SURE the timing is RIGHT!!..with this much compression the right fuel, timing, valve clearance, cam timing, etc, MUST be perfect!!!

Sep 14, 2017 | Yamaha 2005 Rhino 660 Auto 4x4

1 Answer

My 05 Yamaha Grizzly 660 will not start. In my limited troublshooting practice I looked at FUEL, FIRE and AIR. Here is the fault, the engine will not start. I checked wires/fuses, plugs, fuel lines and air...


Sounds like you have a stuck float needle in the carbs (2). Usually after a few days with gas in the carb they will free up, you could 'knock' on the carbs with the plastic end of a screwdriver to help free them up. If not, turn off fuel, drain the carbs and fill them with carb cleaner for 24 hours. Redrain, attach fuel lines and turn the gas back on. If still no start it's time for a rebuild...

Mar 05, 2017 | Yamaha 2005 Grizzly 660 Auto 4x4

Not finding what you are looking for?
Yamaha 2004 Kodiak 450 Auto 4x4 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

537 Answers

Wayne McNeil

Level 2 Expert

168 Answers

yadayada
yadayada

Level 3 Expert

76649 Answers

Are you a Yamaha ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...