Question about Kymco 2013 UXV 500 IRS 4x4

Open Question

My kymco wont start unless i put my hand over the intake hole

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 polaris 425 magnum wont start


try cranking it with your hand completely blocking the carb intake for a few cranks. that sometimes helps blow out the passages.

Oct 14, 2017 | ATVs

1 Answer

I have 2005 kymco 250 mxu atv and can't get spark has new coil,cdi, solenoid any help thanks...


check the pickup coil and the wiring for the shut off switches. if one rubs and grounds itself on the frame it wont spark.

Feb 08, 2017 | Kymco 2005 MXU 250

1 Answer

Kymco 300 mxu when back fires


back firing is usually a sign of an air leak on the intake manifold.

Dec 01, 2016 | Kymco 2008 MXU 300

2 Answers

Kymco 250 mongoose clicks, wont start battery solenoid are new


clicks, wont crank ??? check ground first, then suspect a bad starter as long as the solenoid and battery are good... a 12v test light will help here

Aug 28, 2014 | Kymco 2005 Mongoose 250

1 Answer

Why wont Kymco MXU 250 start? just a loud high pitched noise is heard


Geez dont keep spending money if your not sure. It sounds like your starter is not throwing in far enough to engage with the ring gear. Please do your hip pocket a favor and get an auto technician to check it before buying a new starter as well. You can also remove the starter and check the gear to make sure its not worn as some are plastic.

Jul 28, 2014 | Kymco 2006 MXU 250

1 Answer

90cc quad chinese wont fire. New battery cleaned the carb the 2 jets and the little one that is on the float. Compression is fine and spark is fine. It cranks and cranks but will not start. So its getting...


just for fun, while you're cranking it put your hand over the intake of the carb completely covering it and see if your hand gets wet with gas. this might even start it too.

Jul 17, 2017 | ATVs

1 Answer

Start out sluggish. loss of power on hill.


that was my first thought, belt is slipping or pully is polished smooth.

Dec 03, 2013 | Kymco 2009 UXV 500 4x4

1 Answer

Have 90 kymco 4wheeler cranks but wont start put new plug and batt plenty of gas now what


make sure filter is clean not gunked up..try draining carb if there is a plug if not.Then try to clean the carb the jets could be clogged not hard at all to take apart.Good luck

Mar 15, 2013 | Kymco 2011 Mongoose 90

Not finding what you are looking for?
Kymco 2013 UXV 500 IRS 4x4 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco ATVs Experts

 Scott Tx
Scott Tx

Level 2 Expert

537 Answers

squeely

Level 3 Expert

454 Answers

terry stevens

Level 3 Expert

991 Answers

Are you a Kymco ATV Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...